I am not a hoarder, but I did it again. This time it's a Mark V

dusty · Post by **dusty** » Sat Dec 10, 2011 5:07 am

You have quit an assortment of items there. You definitely got your monies worth in this transaction.

You also have a lot of work to do. A lot of cleaning, polishing and waxing and some lubrication. But, it will be worth it when you are done.

I'm interested in seeing what the inside of the headstock looks like. Judging from the amount of sawdust collected every where (inside the jointer as an example), the headstock might be full. However, you are not alone. There are several of us here on this forum that have done what you have left to do. It will be fun and educational

Take your time and BE SAFE

tomsalwasser · Post by **tomsalwasser** » Sat Dec 10, 2011 7:30 am

Like Steve in San Diego told me about his many Shopsmith purchases: the best part is getting home and seeing what's all in the box of stuff.

chipmaster · Post by **chipmaster** » Sat Dec 10, 2011 8:46 pm

Thanks guys. There were problems inside the headstock: The speed control assembly was all messed up; the quadrant was bent and the teeth were stripped on the lever arm. Plus the gear on the handle itself that connects to the indicator dial was stripped. I've ordered some new parts from Shopsmith and Bill Mayo is sending me a custom upgrade for the control assembly. I'm passing the time cleaning and polishing. There are some really nice blades in there. I have to learn what application each one is designed to perform.

Not to insult the Mark V fans out there, but playing with this machine has really made me appreciate my 10ER. There's a good chance that I will sell the Mark V after I adapt my 10ER to take the bandsaw and the jointer. We'll see how it goes. It's giving me enjoyment right now just as a tinkertoy--seeing how the speed control mechanism works and all. It just doesn't have the comfortable heft of my 10ER.

The only speeds currently available on the machine are from midrange on up--It's at the low speeds where the teeth are stripped. That being said, I'm still surprised at how loud the machine is compared to the 10ER, and that's even after lubrication. I think the sheet metal acts as a soundbox. I'm not turning it on again until I install the new speed control, but after that I will be on a mission to quiet the thing down if I'm going to keep it.

v/r,

Rick

wa2crk · Post by **wa2crk** » Sat Dec 10, 2011 10:27 pm

Chipmaster;
Chip there is a guy that advertises on the Shopsmith section on E-Bay that rebuilds the speed handle gear. The price seems OK and I have not heard of any complaints about his work.
Bill V

chipmaster · Post by **chipmaster** » Sat Dec 10, 2011 10:41 pm

Bill,

Bill Mayo suggested the same guy--said he uses him himself. A better-than-new result because he replaces the aluminum gear with steel. Unfortunately, I had already ordered my new replacement from SS. I'll know better next time.

v/r,

Rick

JPG · Post by **JPG** » Sun Dec 11, 2011 1:49 am

I think I will start looking for another band saw!:D

Although I share your attitude re the 10ER, I recommend keeping the MV. It is upgradable and has a lot of additional goodies available.

trainguytom · Post by **trainguytom** » Sun Dec 11, 2011 12:11 pm

You definitely hit the motherlode. I've bought lots of machines with lots of extra stuff, and I'd take your deal in a heart beat. Also, I know lots of guys don't get excited about non carbide tipped saw blades, but I see you got a bunch. The SS blades are great & I'd recommend you find a local sharpener.

I've done that & have used them with great success. They cut beautifully & stay sharp. (unless you cut nails & stuff) Have fun!

cabotcat · Post by **cabotcat** » Wed Dec 14, 2011 2:53 pm

I would give you $201 for everything right now.

timdgarry · Post by **timdgarry** » Wed Dec 14, 2011 9:08 pm

WOW! I suffer from the same affliction.

chipmaster · Post by **chipmaster** » Wed Dec 14, 2011 11:06 pm

trainguytom wrote:You definitely hit the motherlode. I've bought lots of machines with lots of extra stuff, and I'd take your deal in a heart beat. Also, I know lots of guys don't get excited about non carbide tipped saw blades, but I see you got a bunch. The SS blades are great & I'd recommend you find a local sharpener.

I've done that & have used them with great success. They cut beautifully & stay sharp. (unless you cut nails & stuff) Have fun!

I grew up on a street where a guy had a sign posted outside his garage (in which he kept his home-built airplane) that said he sharpened saws. I wish I could find someone like him today. No luck with internet searches so far.

v/r,

Rick