New Woodworking Shop Goes Shopsmith

Create a review for a woodworking tool that you are familiar with (Shopsmith brand or Non-Shopsmith) or just post your opinion on a specific tool. Head to head comparisons welcome too.

Moderator: admin

judaspre1982
Platinum Member
Posts: 1237
Joined: Tue Jul 08, 2008 10:10 pm

Post by judaspre1982 »

================================
Last edited by judaspre1982 on Sun Apr 30, 2017 3:43 pm, edited 1 time in total.
User avatar
heathicus
Platinum Member
Posts: 2648
Joined: Wed Oct 22, 2008 1:02 am
Location: WhoDat Nation

Post by heathicus »

If both parties were happy and thought the price was fair as the deal was made, then what was dishonorable about it? I share Dusty's opinion. I may be jealous of your friend's deal, but have no negative opinions of either of you.
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
8iowa
Platinum Member
Posts: 1048
Joined: Tue Aug 01, 2006 9:26 am

Post by 8iowa »

If you looked at my postings you will fail to see any reflection on anyone's character. I merely stated what I did in a somewhat similar circumstance as this is my makeup and upbringing.

If I'm in such a minority here, in what to do in a situation like this, then I'm gone.
lv2wdwrk
Gold Member
Posts: 406
Joined: Thu Jul 20, 2006 9:40 am
Location: SWMO

Post by lv2wdwrk »

judaspre1982 wrote:I'm sorry to have to delete my posts in this thread.

According to a few messages I received that were not posted on the open forum, it seems some members were under the impression that the Shopsmith items my friend paid for where obtained under less than honorable circumstances.

Rather than try to defend my friend's and my own character/honor, I chose to remove what I posted.

Dave
There have been many times I have offered less than the asking price. The seller can always say no.

Personally I see nothing wrong with what was done as long as each party was happy with the out come.
Bob

Don't try to make sense out of nonsense!
lv2wdwrk
Gold Member
Posts: 406
Joined: Thu Jul 20, 2006 9:40 am
Location: SWMO

Post by lv2wdwrk »

8iowa wrote:If you looked at my postings you will fail to see any reflection on anyone's character. I merely stated what I did in a somewhat similar circumstance as this is my makeup and upbringing.

If I'm in such a minority here, in what to do in a situation like this, then I'm gone.
I do not think Dave was making reference to your post. He said they were PM"s and not public posts.
Bob

Don't try to make sense out of nonsense!
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

If my teasing you was offensive to you I apologize. I rather suspect that all parties involved with your friends transaction received exactly what was desired. It is difficult for me to criticize any situation where everyone comes out a winner. If there are those in PM's who are critical that would seem to me to be good reason for them to post privately. Although it seems sad to me when negative posts are sent that reflect badly on the rest of the group. Jim
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
User avatar
jcraigie
Platinum Member
Posts: 505
Joined: Sun Sep 05, 2010 8:17 pm
Location: Fowlerville, Michigan

Post by jcraigie »

Wow, this went off the rails in a terrible way :(

It was a great deal and I am happy that your friend got it and it gets to stay as a shpsmith and not scrap metal. The seller who didn't want it got some extra cash = awesome.

It was an agreed upon deal and it seemed as if both parties were happy so what is the problem :confused: Seems like a good deal to me.

Like 8iowa I have gotten way to good of a deal and given more than the agreed upon price, no big deal it was my "thing" to do but I would not expect (nor encourage) anyone to do what I do (do your own thing and be true to yourself). I have also offered to do the same and been turned down with a very kind "thanks but we made the deal already and I'm happy with it"

For people to PM mean comments about it is just wrong and it is incredulous to me that most of the people that I deal with on this forum would do such things. :(
1984 Mark V 500 and an early 1954 greenie. jointer, belt sander, bandsaw, jigsaw, planner.

Jeff
judaspre1982
Platinum Member
Posts: 1237
Joined: Tue Jul 08, 2008 10:10 pm

Post by judaspre1982 »

==========================
Last edited by judaspre1982 on Sun Apr 30, 2017 3:40 pm, edited 1 time in total.
User avatar
JPG
Platinum Member
Posts: 35430
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

judaspre1982 wrote:My reason for deleting my posts did not have anything to do with what you posted. Please believe me when I say this!

8iowaI hope you are still checking into the forums so you can read this post.
I certainly would not want you to avoid coming hear and enjoying what this site has to offer like you have done for so long.You always have good info to provide us and this forum needs to keep and attract as many members as they can of your caliber.

I did not have a problem with anything anyone posted on the open forum and for the record, no one who posted on my thread contacted me off the open forum.

My choice to delete my photos and comments was based on what was stated elsewhere and since I didn't know how many other members felt this way, I felt it best to just delete my posts.

I now feel that I made a mistake in actions taken and should have just let the issue stay off the open forum. For this I most apologize.

I have learned another valuable lesson today.

Thanks to all who commented and lets get back to what makes this forum so special.

Peace, Dave

1) As you stated, neither your friend nor the seller had a clue!

2) They both acted in good faith and came to an agreement.

3) Although you were present and were aware of the 'true' value, you were not actively involved. I do not recall you saying either one asked for your opinion.

4) I see 8iowa's point and generally agree with his action described, but he was an active participant who knew the 'true' value of what he was purchasing. Your friend as you said, had not a clue.

5) Therefore I consider ignorance as a justifiable 'excuse'.(if one is even necessary)

6) Now as for those who chose to chastise 'privately', I say why the hiding? What did you have to say that cannot stand the light of public exposure?

7) I cannot understand a response that includes I am leaving and not coming back. Burning bridges is rarely a good move IMHO.

8) I will be the last to feel offended by someone else's opinion. I may not agree, but respect another's right to a differing opinion. However I retain the option of attempting to enlighten them!

9) Emotions cause us to react illogically to what we perceive as a personal attack. Those emotions will get us in trouble most of the time. When experiencing those negative emotions, it is best to back away and take some more 'looks' at the situation.

10) Personal honesty with one's self goes a long way towards avoiding inappropriate reactions to what we perceive as 'personal' attacks.

Human frailty as I see it!;)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
terrydowning
Platinum Member
Posts: 1678
Joined: Mon Jul 19, 2010 3:26 pm
Location: Windsor, CO

Post by terrydowning »

Sheesh,

Now I feel like I've missed something....
--
Terry
Copy and paste the URLs into your browser if you want to see the photos.

1955 Shopsmith Mark 5 S/N 296860 Workshop and Tools
https://1drv.ms/i/s!AmpX5k8IhN7ahFCo9VvTDsCpoV_g

Public Photos of Projects
http://sdrv.ms/MaXNLX
Post Reply