In all seriousiness anything that hangs from your neck will bother you, either schaffing the neck, giving you a stiff neck or just plain uncomfortable.
There are aprons out there that have shoulder straps that go over the shoulder and connec to the waist band in back. This takes all the weight off your neck and doesn't bother you as much.
I wish shopsmith would come out with a really nice shopsmith apron with should straps instead of neck straps.
I would even like the old shop coats the Demo'ers use to wear. If I remember correctly they were blue short sleeved and had to fairly large waist pockets and one nice breast pocket for pencils and rules.
Right now I use a "BucketBoss" brand 14 pocket over the should bib apron. It is always loaded with my pencil, eraser, pen, piece of chaulk, bees wax or soap, tape measure, small piece of sand paper, pocket block plane, small try square, utility knife, small nail set and of course the Shopsmith wrench. In the empty pockets I can carry nails, screws, small parts or whatever.
Man is sure is handy when your in the middle of a job and need to check an angle real quick or wax up a screw to drive it easy and you have what you need right there with you.
Denim Shop Apron Review
Moderator: admin
- Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
-
swampgator
- Platinum Member
- Posts: 1256
- Joined: Fri Nov 27, 2009 9:32 pm
- Location: Pensacola, FL
I would like to have the SS logo on my apron. Here's what I use and it's like the one Ed spoke of.
http://www.rockler.com/product.cfm?page ... =&sli_sid=
It's comfortable, affordable and washable. Anytime I'm making sawdust, I wear it.
http://www.rockler.com/product.cfm?page ... =&sli_sid=
It's comfortable, affordable and washable. Anytime I'm making sawdust, I wear it.
Steve, the old Florida gator
I just love it when she says I can go make sawdust.

I just love it when she says I can go make sawdust.
Very interesting. So you like the rockler style which is nearly identical to the Shopsmith version with the same advantages. Plus that Shopsmith logo you desire. I have used mine for several years. I enjoy it very much. Incidentally I have a permanently, badly injured shoulder and am unable to wear anything that applies any kind of pressure on that shoulder. This apron is the only one I can comfortably wear, I love being comfortable. The only improvement mine has is an embroidered name badge with my name. Go for the best. Jim
http://www.shopsmith.com/ownersite/cata ... eapron.htm
http://www.shopsmith.com/ownersite/cata ... eapron.htm
F. Jim Parks
Lakewood, Colorado:)
When the love of power is replaced by the power of love the world will have a chance for survival.
Lakewood, Colorado:)
When the love of power is replaced by the power of love the world will have a chance for survival.
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
OMG! What happened to her in the third pix!!!swampgator wrote:I would like to have the SS logo on my apron. Here's what I use and it's like the one Ed spoke of.
http://www.rockler.com/product.cfm?page=10257&site=ROCKLER&uuid=&sli_sid=
It's comfortable, affordable and washable. Anytime I'm making sawdust, I wear it.
Notice the big butt does not show in the second pix!:rolleyes:
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
Actually I really like the Shopsmith designed one. I didn't know they made it. But I have one little problem, mine was $10 on sale at Sears which is 1/4 the price of the SS one.fjimp wrote:Very interesting. So you like the rockler style which is nearly identical to the Shopsmith version with the same advantages. Plus that Shopsmith logo you desire. I have used mine for several years. I enjoy it very much. Incidentally I have a permanently, badly injured shoulder and am unable to wear anything that applies any kind of pressure on that shoulder. This apron is the only one I can comfortably wear, I love being comfortable. The only improvement mine has is an embroidered name badge with my name. Go for the best. Jim
http://www.shopsmith.com/ownersite/cata ... eapron.htm
Ed in Tampa
Stay out of trouble!
Stay out of trouble!
Dare I ask how long ago? Was that a close out sale? Did it include the Shopsmith logo? JimEd in Tampa wrote:Actually I really like the Shopsmith designed one. I didn't know they made it. But I have one little problem, mine was $10 on sale at Sears which is 1/4 the price of the SS one.
F. Jim Parks
Lakewood, Colorado:)
When the love of power is replaced by the power of love the world will have a chance for survival.
Lakewood, Colorado:)
When the love of power is replaced by the power of love the world will have a chance for survival.
- Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
That last one I bought was probably less than five years ago. Was it on closeout? I don't know I don't think so. Was it on sale? Yes probably I rarely buy anything that isn't on sale. What was regular price? I don't know but knowing Sears it was probably no more than 20% off sale most likely a 10% off sale.fjimp wrote:Dare I ask how long ago? Was that a close out sale? Did it include the Shopsmith logo? Jim
If I recall I bought the one before than from woodcraft again I know it was on sale but it was so long ago I don't remember the price. Gave that one to somebody when I got my new one.
No sadly it does not have the Shopsmith logo on it. But I got a I love my Shopsmith bumper sticker that I put on my forehead when ever I work in the shop. Perhaps that is why the neighbors look at me funny and it doens't have anything to do with the apron at all.
Ed in Tampa
Stay out of trouble!
Stay out of trouble!
- a1gutterman
- Platinum Member
- Posts: 3653
- Joined: Tue Jan 09, 2007 12:45 am
- Location: "close to" Seattle
Cute story. I have never had the blue one, but I did buy the white one when it was on sale, several years ago. I have only remembered to wear it once or twice. I usually remember to blow the dust off before going into the house...my wife is very tolerant of my transgressions... especially if I was in the shop making something for her.mrhart wrote:Item number 555208:
Budget-priced blue denim Apron[align=left]Full-length, 28[/align]
protects your clothes and carries
your tools, too
˝]x 36˝ washable denim shop
[align=left]apron. Navy blue with a red Shopsmith logo.[/align]
The big 15˝ x 6˝ covered pocket holds tools.
I aquired the ShopSmith Denim Shop Apron...
...I am now considering the apron upgrade to the model 521802:
[align=left]World’s Most Versatile[/align]
Shop Apron
[align=left]This 100% fully washable cotton-canvas Shop
Apron is the most versatile apron available today.
Made in the USA, the slip-over design has fully[/align]
adjustable 1
˝ wide nylon web shoulder straps,
[align=left]and an adjustable (to 52[/align]
˝ waist) 11/2˝ wide nylon
[align=left]web belt with a quick release buckle.
[align=left]This unique apron has 20 variable-sized
pockets from a pocket for your pencil to a huge
6[/align]
[/align]
1/4˝ square, plus two rugged, 11/2˝ wide nylon
[align=left]web tool loops.
[align=left]Please give us here at the forum or at least myself your review of the upgraded apron vs. the standard denim nerd model.[/align]
[/align]
Tim
Buying US made products will help keep YOUR job or retirement funds safer.
Buying US made products will help keep YOUR job or retirement funds safer.