Heath's Woodworking Projects
Moderator: admin
-
judaspre1982
- Platinum Member
- Posts: 1237
- Joined: Tue Jul 08, 2008 10:10 pm
================================
Last edited by judaspre1982 on Thu May 11, 2017 2:01 pm, edited 1 time in total.
- mickyd
- Platinum Member
- Posts: 2999
- Joined: Mon Feb 09, 2009 1:18 pm
- Location: San Diego, CA
- Contact:
I am so far behind in my forum reads that I am just seeing your completed lantern post. Congratulations!!!! They came out very nice. The methods you used to overcome your obstacles were phenomenal. Very creative.heathicus wrote:Lanterns are finally done!
.........
And with that, my shop gets packed up for who knows how long while we move and then I get another shop.
So, what was in the pic https://forum.shopsmith.com/viewtopic.php?p=71555&postcount=94 ??????
Too bad your closing shop for a few months. You will probably be having DT's shortly. Maybe once you've moved, you could walk down the street with ShopSmith in tow and ask your neighbors if you could use their garage or shed. I can picture you now, walking down the street, head and shoulders slouched down, pulling the SS on a rope......
Mike
Sunny San Diego
Sunny San Diego
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
mickyd wrote:I am so far behind in my forum reads that I am just seeing you completed lantern post. Congratulations!!!! They came out very nice. The methods you used to overcome your obstacles were phenomenal. Very creative.
So, what was in the pic https://forum.shopsmith.com/viewtopic.php?p=71555&postcount=94 ??????
Too bad your closing shop for a few months. You will probably be having DT's shortly. Maybe once you've moved, you could walk down the street with ShopSmith in tow and ask your neighbors if you could use their garage or shed. I can picture you now, walking down the street, head and shoulders slouched down, pulling the SS on a rope......
Heath lives in a 'Rural' area! He ain't got no streets. He got roads! His neighbors distance away is measured in fractional Miles! I think he will just grit his teeth and bear it!:)
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
My wife has threatened to keep the house while I go out 'walking my horse' like this:omickyd wrote: Too bad your closing shop for a few months. You will probably be having DT's shortly. Maybe once you've moved, you could walk down the street with ShopSmith in tow and ask your neighbors if you could use their garage or shed. I can picture you now, walking down the street, head and shoulders slouched down, pulling the SS on a rope......
Chris
Hilarious image (made me laugh out loud), but JPG is right. To roll the thing to my neighbor's house, I'd need at least 8" rubber wheels. And four wheel drive.
What was the thing in the picture? Well, it was a flaw in the finish. On the last coat, there was a "run" that I didn't see. And, in that picture, it caught the light just the right way so that one side was highlighted and looked like a hair, and the other side was darkened and looked like the hair's shadow. But in person, it's barely noticeable. I see it. I know it's there. And it bugs me. But mom won't see it. And if my wife has seen it, she's been kind enough to not point it out.
What was the thing in the picture? Well, it was a flaw in the finish. On the last coat, there was a "run" that I didn't see. And, in that picture, it caught the light just the right way so that one side was highlighted and looked like a hair, and the other side was darkened and looked like the hair's shadow. But in person, it's barely noticeable. I see it. I know it's there. And it bugs me. But mom won't see it. And if my wife has seen it, she's been kind enough to not point it out.
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
I threw this together Sunday. MY first non-shop project since building my new shop.
Anybody want to guess what it is?

Anybody want to guess what it is?

Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
heathicus wrote:I threw this together Sunday. MY first non-shop project since building my new shop.
Anybody want to guess what it is?
Seeing that it appears to be relatively small......I'll go way out on a limb and guess that you pour dried beans/peas into the top and sort out the 'stuff' that you don't want on the bottom shelf.
Like I said......way out on a limb.
Course, it could be a kitty feeder.........
Or for
Bud F.
1998 Mark V 510 bought used 2006, Jointer, 2 Bandsaws, ca 1960 Yuba SawSmith RAS
Projects and "stuff": http://www.bfulgham.com/JAlbum/Woodworking_Index/
1998 Mark V 510 bought used 2006, Jointer, 2 Bandsaws, ca 1960 Yuba SawSmith RAS
Projects and "stuff": http://www.bfulgham.com/JAlbum/Woodworking_Index/
Really good guess! You've got the basics of the thing... put something in the top and something comes out on to the bottom shelf. But you're way off on what goes through it.bffulgham wrote:Seeing that it appears to be relatively small......I'll go way out on a limb and guess that you pour dried beans/peas into the top and sort out the 'stuff' that you don't want on the bottom shelf.
Like I said......way out on a limb.
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Bird Feeder???heathicus wrote:Really good guess! You've got the basics of the thing... put something in the top and something comes out on to the bottom shelf. But you're way off on what goes through it.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Negative!
It is a dice tower. I built it for use in our family game nights. Rolling dice was always a problem, especially for the girls (ages 4 and 5). We would spend as much time chasing dice across the floor or trying to remember where pieces went on the board that were hit by dice as we did playing the game. Using the box lid worked sometimes, but always seemed to get in the way. So I built this dice tower for rolling dice. Drop the dice in the top, they tumble down a series of ramps, then roll out on to the platform. It makes a nice clikety-clack sound too. The kids have loved it and want to play games now just so they can use the dice tower.
Built out of some cedar scraps. I goofed a couple of times, but compensated as necessary. The scraps were the thickness of the panels as seen in the pic (I didn't measure, but no more than 1/4"), but half the width. So each was a glue-up of two pieces. I found a few pieces that seemed to be bookmatched pairs and used my favorites for the front and the platform.
It is a dice tower. I built it for use in our family game nights. Rolling dice was always a problem, especially for the girls (ages 4 and 5). We would spend as much time chasing dice across the floor or trying to remember where pieces went on the board that were hit by dice as we did playing the game. Using the box lid worked sometimes, but always seemed to get in the way. So I built this dice tower for rolling dice. Drop the dice in the top, they tumble down a series of ramps, then roll out on to the platform. It makes a nice clikety-clack sound too. The kids have loved it and want to play games now just so they can use the dice tower.
Built out of some cedar scraps. I goofed a couple of times, but compensated as necessary. The scraps were the thickness of the panels as seen in the pic (I didn't measure, but no more than 1/4"), but half the width. So each was a glue-up of two pieces. I found a few pieces that seemed to be bookmatched pairs and used my favorites for the front and the platform.
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration