Hi all... I am looking at a used shopsmith and the serial # is 51-002154. Based on the Shopsmith sitre's published serial #s it could be manufactured between 1985-86? Anyway to confirm the date or get into the specific year at least?
Thanks!
Tim D.
Serila # Year?
Moderator: admin
Serila # Year?
Doc Tim
Two fully restored 10Es--my specialty
, 510 pony sanding station with belt sander and steel discs, and a 2007 510 general purpose with 4" planer in the final set up stage 
Two fully restored 10Es--my specialty
, 510 pony sanding station with belt sander and steel discs, and a 2007 510 general purpose with 4" planer in the final set up stage 
Sorry but it doesn't look like a valid serial number.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
Thanks!
Bob... thanks for the info even it is notn much to go on 
Doc Tim
Two fully restored 10Es--my specialty, 510 pony sanding station with belt sander and steel discs, and a 2007 510 general purpose with 4" planer in the final set up stage
Two fully restored 10Es--my specialty
, 510 pony sanding station with belt sander and steel discs, and a 2007 510 general purpose with 4" planer in the final set up stage 
Ok, I'm not crazy, I couldn't find that number too. If you scroll down on this link you'll find a list of serials by month they were manufactured.
http://www.shopsmith.com/ownersite/faq/markv.htm
http://www.shopsmith.com/ownersite/faq/markv.htm
Could it be that it was a preliminary unit fabricated in Jan-Mar of 1986? Based on the number 002154 it would fall into March? Here's a pic of the plate.
[ATTACH]17432[/ATTACH]
[ATTACH]17432[/ATTACH]
- Attachments
-
- SS 002154.jpg (1.16 KiB) Viewed 1258 times
Doc Tim
Two fully restored 10Es--my specialty, 510 pony sanding station with belt sander and steel discs, and a 2007 510 general purpose with 4" planer in the final set up stage
Two fully restored 10Es--my specialty
, 510 pony sanding station with belt sander and steel discs, and a 2007 510 general purpose with 4" planer in the final set up stage Pic size
I was able to see and confirm the number on the plate and just pasted it in as verification: 002154.
Doc Tim
Two fully restored 10Es--my specialty, 510 pony sanding station with belt sander and steel discs, and a 2007 510 general purpose with 4" planer in the final set up stage
Two fully restored 10Es--my specialty
, 510 pony sanding station with belt sander and steel discs, and a 2007 510 general purpose with 4" planer in the final set up stage