Tree came down on house
Moderator: admin
Thank goodness you were not hurt. I hope all goes well with your repairs.
We had 91 mph winds yesterday here in Fort Wayne. This is a link to a local TV station's picture gallery of the storm we had and it's damage: http://interactives.wane.com/photomojo/gallery/3335/1/june-29-severe-weather/tree-in-car/
Mike
http://interactives.wane.com/photomojo/gallery/3335/1/june-29-severe-weather/tree-in-car/
We had 91 mph winds yesterday here in Fort Wayne. This is a link to a local TV station's picture gallery of the storm we had and it's damage: http://interactives.wane.com/photomojo/gallery/3335/1/june-29-severe-weather/tree-in-car/
Mike
http://interactives.wane.com/photomojo/gallery/3335/1/june-29-severe-weather/tree-in-car/
- fredsheldon
- Platinum Member
- Posts: 1175
- Joined: Tue Jan 17, 2012 1:31 pm
- Location: The Woodlands, Texas
We have over 7,000 dead trees here in The Woodlands, Tx due to the dry conditions last year and all are just waiting for the first big storm from the Gulf to blow them all down. Most are 60 foot pines but many are oaks. I sure don't want to be on a street when one of those pines decides to fall across the roadway.
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
It is a real shame that someone couldn't come in to harvest them.fredsheldon wrote:We have over 7,000 dead trees here in The Woodlands, Tx due to the dry conditions last year and all are just waiting for the first big storm from the Gulf to blow them all down. Most are 60 foot pines but many are oaks. I sure don't want to be on a street when one of those pines decides to fall across the roadway.
Is "standing dead wood" good for lumber?
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
It depends upon the stage of rot it's in and the amount of splitting that has occurred. But Hay at least it's PRE-DRYED.dusty wrote:It is a real shame that someone couldn't come in to harvest them.
Is "standing dead wood" good for lumber?
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
Al
I watched your video and am certainly thankful you weren't sitting on the porch "storm watching" when that oak decided to land there.
If you can think of any good to come out of this...besides getting to rebuild your porch...maybe you can harvest the lumber to do something with?
Again, thankful all are OK :-)
Geo
I watched your video and am certainly thankful you weren't sitting on the porch "storm watching" when that oak decided to land there.
If you can think of any good to come out of this...besides getting to rebuild your porch...maybe you can harvest the lumber to do something with?
Again, thankful all are OK :-)
Geo
The funny thing is we always have wanted to replace those sliding glass doers on the sun room and of course the tree didn't do a thing to 'em.eagleta2 wrote:Al
I watched your video and am certainly thankful you weren't sitting on the porch "storm watching" when that oak decided to land there.
If you can think of any good to come out of this...besides getting to rebuild your porch...maybe you can harvest the lumber to do something with?
Again, thankful all are OK :-)
Geo
-
swampgator
- Platinum Member
- Posts: 1256
- Joined: Fri Nov 27, 2009 9:32 pm
- Location: Pensacola, FL
Al, so sorry about your misfortune. But, that tree looks like some really nice lumber. It appears to be a black oak. Do you know which kind of oak it is? Also, very glad you have insurance. Many of us in Florida cannot get insurance on old houses that are paid for. Three of us in two blocks can't get any insurance and the houses are in great shape. Another story for another time.
Also, sorry to all you folks who endured any portion of Debby. We had 15 inches of rain in two days and the wind kept things so nice and cool.
Ed in Tampa, if I had those pine trees, I would find someone near you that will cut down the trees and mill them into lumber. If you have no need for the lumber, you can sell it off to offset the cost of cutting them down. JMHO.
Also, sorry to all you folks who endured any portion of Debby. We had 15 inches of rain in two days and the wind kept things so nice and cool.
Ed in Tampa, if I had those pine trees, I would find someone near you that will cut down the trees and mill them into lumber. If you have no need for the lumber, you can sell it off to offset the cost of cutting them down. JMHO.
Steve, the old Florida gator
I just love it when she says I can go make sawdust.

I just love it when she says I can go make sawdust.
- cincinnati
- Platinum Member
- Posts: 1172
- Joined: Sun Apr 15, 2007 6:40 pm
- Location: Cincinnati, Ohio