Mark 510 poer up problem

bhiebeler · Post by **bhiebeler** » Thu Aug 09, 2012 6:45 pm

I purchased a 510 used last week and was in the process of cleaning it up and doing head stock maintenance. The head stock powered up and I increased the speed. The GPI tripped on the curcuit and after reseting the GPI the head stock will not power on. I have tested the outlet and is connected okay. I spoke with the previous owner and he said that he replaced the switch about a year ago. What is the best way to determine the problem. Thanks

bill

garys · Post by **garys** » Fri Aug 10, 2012 9:19 am

The best way to find an electrical problem it to test with a voltmeter, but if you don't understand electricity, I don't recommend that. It is a good way to kill yourself if you don't know what you are doing.

billmayo · Post by **billmayo** » Fri Aug 10, 2012 11:19 pm

bhiebeler wrote:I purchased a 510 used last week and was in the process of cleaning it up and doing head stock maintenance. The head stock powered up and I increased the speed. The GPI tripped on the curcuit and after reseting the GPI the head stock will not power on. I have tested the outlet and is connected okay. I spoke with the previous owner and he said that he replaced the switch about a year ago. What is the best way to determine the problem. Thanks

bill

Place you location in your profile as there may someone nearby who can help you. Try doing a search in the Forum for power problems as there has been many helpful solutions offered in them. I will agree if you are not familar with electrical problems, it can be very dangerious to your health.