Feeling like an Idiot
Moderator: admin
- fredsheldon
- Platinum Member
- Posts: 1175
- Joined: Tue Jan 17, 2012 1:31 pm
- Location: The Woodlands, Texas
Feeling like an Idiot
I installed my new extension table bracket last night on my 520 table. One of the adjuster bolts was hanging up on a rib so I got my drimel out and proceeded to grind away so it would clear the rib. After about 10 minutes of grinding I gave it another try. That's when I noticed that there were 3 holes available to screw the adjustment bolt into.
I hope this is not an sign of things to come as I approach 70.
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
I have concluded that it has nothing to do with approaching 70. There are other people on this forum who have approached and passed 70 and we never hear that they have these problems so it must be something else.fredsheldon wrote:I installed my new extension table bracket last night on my 520 table. One of the adjuster bolts was hanging up on a rib so I got my drimel out and proceeded to grind away so it would clear the rib. After about 10 minutes of grinding I gave it another try. That's when I noticed that there were 3 holes available to screw the adjustment bolt into.I hope this is not an sign of things to come as I approach 70.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Well past 70!
All those things started well before the start of my 8th decade!:D
So . . . . 70 is irrelevant!:)
All those things started well before the start of my 8th decade!:D
So . . . . 70 is irrelevant!:)
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
I just lost an old friend this week (Sunday the 19th) who was 76 years old...
He and his son were loading up a non-running antique tractor on his trailer at a tractor show a few miles from here using a second tractor to get it on the trailer. During the loading the non-running tractor shifted to one side and one wheel dropped over the edge. He jumped to get clear but went down head first breaking his neck in the fall. He was resuscitated but died after helicopter transport.
Before anyone assumes that he was a stumbly old man
He was also a pilot and an avid sky-diver. His last dive? Saturday the 18th at the same show.
We each have to go sometime / somehow... His was not really the best way but it beat the hell out of the almost 10 year downhill slide into bad personality changes, confusion and fear from Alzheimer's that took my mother down several years ago...
My wife's father switched careers at about 70 and was still operating heavy earthmoving equipment everyday when he turned 81 or 82 (I forget). His heart slowed him down toward the last but he stayed very sharp and one night he went to sleep and did not wake up... If I could pick I would pick that one...
My friend was in quite good condition yet and very sharp. If it were not for the accident he might have pushed toward 3 digits.
We had the farrier out this afternoon and I held / wrangled the horses while he "overhauled"
24 hooves. I'll be better tomorrow but tonight I feel much older than my 70 years.
Some were very cooperative but a couple (younger ones) required some serious handling.
A lot of normally very loving horses do not belong to the farrier fan clubs...
.
He and his son were loading up a non-running antique tractor on his trailer at a tractor show a few miles from here using a second tractor to get it on the trailer. During the loading the non-running tractor shifted to one side and one wheel dropped over the edge. He jumped to get clear but went down head first breaking his neck in the fall. He was resuscitated but died after helicopter transport.
Before anyone assumes that he was a stumbly old man
We each have to go sometime / somehow... His was not really the best way but it beat the hell out of the almost 10 year downhill slide into bad personality changes, confusion and fear from Alzheimer's that took my mother down several years ago...
My wife's father switched careers at about 70 and was still operating heavy earthmoving equipment everyday when he turned 81 or 82 (I forget). His heart slowed him down toward the last but he stayed very sharp and one night he went to sleep and did not wake up... If I could pick I would pick that one...
My friend was in quite good condition yet and very sharp. If it were not for the accident he might have pushed toward 3 digits.
We had the farrier out this afternoon and I held / wrangled the horses while he "overhauled"
A lot of normally very loving horses do not belong to the farrier fan clubs...
.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
70 is irrelevant as a threshold of 'duh' behavior.db5 wrote:Irrelevant? I don't think so. Ask the millions who never made it to that age.
'Duh' happens much sooner(if not all the time:D).
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange