Who has the pro planer pulley upgrade

onevw · Post by **onevw** » Sun Sep 16, 2012 6:45 pm

I has a 3 inch and a 5 inch pulley.

So is the 5 inch on the motor and the 3 inch on the cutter?

This would be normal to me as to increase the cutter head speed.

letterk · Post by **letterk** » Sun Sep 16, 2012 7:24 pm

Yes, the 5" on the motor and the 3" on the cutterhead. My planer which was used came with it, so I don't know better. I imagine it can only be a good thing. More cuts per inch can't be bad, can it?

Versus a 1:1 ratio wouldn't it now turn 1.67:1.

The upgrade is on sale through midnight tonight.