Sometimes it's nice to be able to knock out a project in 1 afternoon

Moderator: admin

bffulgham
Gold Member
Posts: 459
Joined: Tue Aug 21, 2007 9:18 am
Location: Amarillo, TX area

Sometimes it's nice to be able to knock out a project in 1 afternoon

Post by bffulgham »

I've been doing a catch as catch can (for time) on a 'simple' little cabinet to be a book case for cookbooks and to house a charging station for the various electronic junk we have around. This particular project has been kicking my butt every time I turn around and I'm beginning to hate working on it.

So, today I completed a different project, start to finish, and it really feels good. At our 'other place', I needed to replace an insulated box over the pipes where the water well comes out of the ground. It's not anything fancy, but I was able to finish the project in about 3 hours.
It ain't purty....and it ain't fine woodworking, but it's done!
rough dimensions are 2' x 2' x 4'. Insulated with 2" foamboard.
[ATTACH]19074[/ATTACH]

[ATTACH]19075[/ATTACH]

[ATTACH]19076[/ATTACH]

Oh, and make a batch of green chile stew for supper :D
[ATTACH]19077[/ATTACH]
Attachments
IMG_1377 (Custom).JPG
IMG_1377 (Custom).JPG (92.9 KiB) Viewed 1853 times
IMG_1378 (Custom).JPG
IMG_1378 (Custom).JPG (60.83 KiB) Viewed 1854 times
IMG_1380 (Custom).JPG
IMG_1380 (Custom).JPG (75.38 KiB) Viewed 1854 times
IMG_1381 (Custom).JPG
IMG_1381 (Custom).JPG (81.08 KiB) Viewed 1854 times
Bud F.
1998 Mark V 510 bought used 2006, Jointer, 2 Bandsaws, ca 1960 Yuba SawSmith RAS
Projects and "stuff": http://www.bfulgham.com/JAlbum/Woodworking_Index/
User avatar
dgale
Platinum Member
Posts: 1007
Joined: Fri Jul 13, 2012 1:17 am
Location: Dows Prairie, CA

Post by dgale »

It doesn't get much better than green chili stew :)
User avatar
camerio
Platinum Member
Posts: 602
Joined: Fri Aug 11, 2006 8:01 am
Location: Valcartier, just north of Quebec City, CANADA

Post by camerio »

Oh ! That looks good .... I would like your recipe ... no, not the box, the green chile stew? I know, I could have looked it up on internet, but it would not be YOUR recipe.
Good Igloo box also and the satisfaction that goes with work well done is also something to be savoured with the stew.
Camerio
MarkV 520 & Band saw
bffulgham
Gold Member
Posts: 459
Joined: Tue Aug 21, 2007 9:18 am
Location: Amarillo, TX area

Post by bffulgham »

camerio wrote:Oh ! That looks good .... I would like your recipe ... no, not the box, the green chile stew? I know, I could have looked it up on internet, but it would not be YOUR recipe.
Good Igloo box also and the satisfaction that goes with work well done is also something to be savoured with the stew.

It's 2x2x4'....wait....you said stew.....


Here's the base recipe I start with: Caldillo (Northern New Mexico-style Soup). (The home page, Cocinas De New Mexico. has lots of New Mexico traditioinal recipes.)
But, I'm not much on following exact directions...
I normally use lean pork cut into 3/4" cubes.
Add a good sized pinch of Mexican Oregano.
Mince a couple of cloves of garlic, then sauté the onions and garlic before adding the meat to be browned.
Oh, don't confuse jalapeno peppers for green chile....a totally different animal.
I also add cooked pinto beans or black beans.
When using pork, I'll use chicken stock for liquid. Beef broth when I do beef.

It's best simmered on the back of the wood stove for 4-6 hours, but, I don't have that option any longer. A slow cooker does wonders after you sauté the onions, garlic and brown the meat. A pot on the stove is my last resort....or when I forget to put it in the slow cooker like I forgot yesterday.

Now, for a batch of carne adovada :rolleyes:
Bud F.
1998 Mark V 510 bought used 2006, Jointer, 2 Bandsaws, ca 1960 Yuba SawSmith RAS
Projects and "stuff": http://www.bfulgham.com/JAlbum/Woodworking_Index/
User avatar
dgale
Platinum Member
Posts: 1007
Joined: Fri Jul 13, 2012 1:17 am
Location: Dows Prairie, CA

Post by dgale »

Some hominy or dried posole (if you can find it around you...hard to do outside the SW it seems...) wouldn't be a half bad addition as well. Thanks for the inspiration...I may just have to make a pot this weekend.
User avatar
camerio
Platinum Member
Posts: 602
Joined: Fri Aug 11, 2006 8:01 am
Location: Valcartier, just north of Quebec City, CANADA

Post by camerio »

[quote="bffulgham"]It's 2x2x4'....wait....you said stew.....

Yes that's what I said .... lol

You said : Oh, don't confuse jalapeno peppers for green chile....a totally different animal.

When you say 'green chile' , is this the same as green peppers ?

Thanks for the recipe and the humour as well, you did not see it but I had a huge smile on my face.
Camerio
MarkV 520 & Band saw
bffulgham
Gold Member
Posts: 459
Joined: Tue Aug 21, 2007 9:18 am
Location: Amarillo, TX area

Post by bffulgham »

camerio wrote:
bffulgham wrote:It's 2x2x4'....wait....you said stew.....

Yes that's what I said .... lol

You said : Oh, don't confuse jalapeno peppers for green chile....a totally different animal.

When you say 'green chile' , is this the same as green peppers ?

Thanks for the recipe and the humour as well, you did not see it but I had a huge smile on my face.

It's funny how we take definitions of things for granted.....
From the part of the world I grew up in, "Green Chile" refers to a pepper like an Anaheim Chile. There are many different varieties... Hatch, a little town in SE New Mexico is one of the major producers of green chile in this part of the world. A green Poblano, roasted and peeled, might be used..... Jalapenos have a totally different flavor that I don't personally care for. Chilies will have a spicy zip. Bell peppers are kinda related, but have no zip.

You might have a problem finding green chile in your part of the world.....since you are a resident of the fine neighbor nation to the north.
dgale wrote:Some hominy or dried posole (if you can find it around you...hard to do outside the SW it seems...) wouldn't be a half bad addition as well. Thanks for the inspiration...I may just have to make a pot this weekend.
Yep, have a 2 pound package of frozen posole and some red chile in the freezer for an upcoming craving. All the ingredients for real Mexican food are hard to find outside of the SouthWest.....even just crossing the border between NM and TX! I fixed green chile beef enchiladas for my in-laws in north central Florida a couple of months ago..... We were able to find canned Hatch green chile in their grocery store....the canned chilies just aren't quite the same as fresh or even frozen.
Bud F.
1998 Mark V 510 bought used 2006, Jointer, 2 Bandsaws, ca 1960 Yuba SawSmith RAS
Projects and "stuff": http://www.bfulgham.com/JAlbum/Woodworking_Index/
User avatar
camerio
Platinum Member
Posts: 602
Joined: Fri Aug 11, 2006 8:01 am
Location: Valcartier, just north of Quebec City, CANADA

Post by camerio »

You are right about finding those here, but there are maybe some available in specialized little market. I will try and look into it.

Thanks for all the info ... and if you ever venture in the beautiful old Quebec city, let us know. It is not always cold weather and the people are very warm and welcoming.
Camerio
MarkV 520 & Band saw
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

camerio wrote:You are right about finding those here, but there are maybe some available in specialized little market. I will try and look into it.

Thanks for all the info ... and if you ever venture in the beautiful old Quebec city, let us know. It is not always cold weather and the people are very warm and welcoming.

Look for "Mercado" on the front!:D
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
camerio
Platinum Member
Posts: 602
Joined: Fri Aug 11, 2006 8:01 am
Location: Valcartier, just north of Quebec City, CANADA

Post by camerio »

Thank you JPG, I will.
Camerio
MarkV 520 & Band saw
Post Reply