Power Pro 220

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
User avatar
wrmnfzy
Platinum Member
Posts: 758
Joined: Sun Apr 29, 2012 7:59 pm
Location: Destrehan, LA

Power Pro 220

Post by wrmnfzy »

I need to extend the movement of my SS and plan on making or buying an extension cord to be able to reach from 10' to 20' further than the SS cord allows. Any suggestions or cautions.
User avatar
fredsheldon
Platinum Member
Posts: 1175
Joined: Tue Jan 17, 2012 1:31 pm
Location: The Woodlands, Texas

Post by fredsheldon »

I have my PowerPro plugged into a 15 foot extension cord and I have had no issues yet. I have a 110/120 20 amp circuit and am using an extension cord from Lowes which I believe it is 14 gauge.
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
User avatar
wrmnfzy
Platinum Member
Posts: 758
Joined: Sun Apr 29, 2012 7:59 pm
Location: Destrehan, LA

Post by wrmnfzy »

Mine is 220, does that make a difference?
User avatar
SDSSmith
Platinum Member
Posts: 1940
Joined: Mon Dec 04, 2006 6:35 pm
Location: San Diego, CA

Post by SDSSmith »

I made up a 12' cord extension cord to plug into my 220 outlet. Works great as an extension and as an adapter for the 110 plug on the end of my PowerPro's power cord.
Rob in San Diego
Email: SDSSmith51 AT gmail.com
User avatar
wrmnfzy
Platinum Member
Posts: 758
Joined: Sun Apr 29, 2012 7:59 pm
Location: Destrehan, LA

Post by wrmnfzy »

thx, I had already changed the plug on the SS to a 220 plug, now I'll just make up an extension. What gauge wire did you use, #10, #12?
User avatar
SDSSmith
Platinum Member
Posts: 1940
Joined: Mon Dec 04, 2006 6:35 pm
Location: San Diego, CA

Post by SDSSmith »

wrmnfzy wrote:thx, I had already changed the plug on the SS to a 220 plug, now I'll just make up an extension. What gauge wire did you use, #10, #12?
I wanted to maintain the ability of using 110 easily, therefore the extension cord. I used 12 gauge for the cord. It is more than adequate with the lower amperage requirements at 220.
Rob in San Diego
Email: SDSSmith51 AT gmail.com
User avatar
wrmnfzy
Platinum Member
Posts: 758
Joined: Sun Apr 29, 2012 7:59 pm
Location: Destrehan, LA

Post by wrmnfzy »

Thx, I wish I would have thought of that.
User avatar
wa2crk
Platinum Member
Posts: 3080
Joined: Sat Jul 22, 2006 7:37 am
Location: Leesburg, Fl

Post by wa2crk »

If you do make up an extension cord with a 220 volt plug on one end and a 110 volt socket on the other be sure to lock the cord up when not in use lest someone not familiar with your wiring scheme plug the cord into the 220 and try to power a 110 tool on the other end. Can be dangerous at least or lethal at worse. Incidentally, it is illegal for a professional electrician even to give instruction on how to make such an adaptor much less provide one. However, what an individual chooses to do is of course their own choice.
Bill V
User avatar
wrmnfzy
Platinum Member
Posts: 758
Joined: Sun Apr 29, 2012 7:59 pm
Location: Destrehan, LA

Post by wrmnfzy »

Thx, I have 220 plug and 220 receptacle and will make ext cord same.
Post Reply