Nope, too much chocolate, and not enough strawberry.reftech wrote:Trainguy stole my thunder. I saw the blank and thought "neopolatin ice cream", as well.
Seriously, that blank as REAL possibilities!
steve
My First Attempt at Bowl Making
Moderator: admin
Flavors?
Exactly what "flavors" do you have in your neopolitan?
'55 Greenie #292284 (Mar-55), '89 SS 510 #020989, Mark VII #408551 (sold 10/14/12), SS Band Saw, (SS 500 #36063 (May-79) now gone to son-in-law as of 11-11), Magna bandsaw, Magna jointer 16185 (May-54), Magna belt sander SS28712 (Dec-82), Magna jigsaw SS4397 (Dec-78), SS biscuit joiner, Zyliss (knockoff) vise, 20+ hand planes, 60s Craftsman tablesaw, CarbaTec mini-lathe, and the usual pile of tools. Hermit of the Hills Woodworks, a hillbilly in the foothills of the Ozarks, scraping by.
-
JPG
- Platinum Member
- Posts: 35428
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Chocolate, Strawberry, Vanillafiatben wrote:Exactly what "flavors" do you have in your neopolitan?
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
fredsheldon
- Platinum Member
- Posts: 1175
- Joined: Tue Jan 17, 2012 1:31 pm
- Location: The Woodlands, Texas
Final Product
Well that was much more work than I thought it would be. That 20 year old wood was hard as a rock. I'm looking forward to using green wood next week to turn my next bowl. It should be easier to turn.
[ATTACH]19927[/ATTACH]
Final Product. My first bowl.
[ATTACH]19928[/ATTACH]
Getting started this morning.. Used my NOVA chuck and Universal Tool Rest which worked great.
[ATTACH]19927[/ATTACH]
Final Product. My first bowl.
[ATTACH]19928[/ATTACH]
Getting started this morning.. Used my NOVA chuck and Universal Tool Rest which worked great.
- Attachments
-
- 2013-01-12_17-05-22_36 (640x360).jpg (156.21 KiB) Viewed 24865 times
-
- 2013-01-12_14-26-16_906 (640x360).jpg (164.87 KiB) Viewed 24870 times
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
I haven't turned anything since 1977,and it was a baseball bat. That was in Junior High School shop class. Today a kid would probably be expelled. How times have changed.
I remember seeing it flex, and that probably convinced me that the job was complete. The tools were probably not too sharp.
Seeing your start and finish photos, I am curious and have lots of questions...is that a Nova Chuck? Why did you switch to that? Did you still turn it with the face plate and 1/2 inch screws? What speed did you use? Was your success contingent on the Powerpro head stock?
I remember seeing it flex, and that probably convinced me that the job was complete. The tools were probably not too sharp.
Seeing your start and finish photos, I am curious and have lots of questions...is that a Nova Chuck? Why did you switch to that? Did you still turn it with the face plate and 1/2 inch screws? What speed did you use? Was your success contingent on the Powerpro head stock?
Brooks
SS Mark 5/520, Band Saw & Jointer SPT, DC3300
SS Mark 5/520, Band Saw & Jointer SPT, DC3300
-
fredsheldon
- Platinum Member
- Posts: 1175
- Joined: Tue Jan 17, 2012 1:31 pm
- Location: The Woodlands, Texas
Yes, this was the first time I have used the Nova Chuck. I started out with a 3" faceplate screwed into the bottom of the bowl with 1/2 inch screws to round out the stock. I then removed the face plate and used a lathe drive center to shape the bottom, and turned a tenon so I could mount the blank on the Nova Chuck. The screw holes were in the tenon and went away with the tendon after I finshed. It probably wasn't necessary to replace the face plate with the chuck but I paid good money for it and I was determined to get my moneys worth out of it:D I started out at 250 rpm and worked up to 500 rpm. That's why I got the PowerPro. I also ordered and received the very last Bowl Turning tool set that Shopsmith had in stock. The Universal Tool rest is worth the money if you need to turn a deep bowl, it lets you position the tool rest deep into your work.bcone1381 wrote:I haven't turned anything since 1977,and it was a baseball bat. That was in Junior High School shop class. Today a kid would probably be expelled. How times have changed.
I remember seeing it flex, and that probably convinced me that the job was complete. The tools were probably not too sharp.
Seeing your start and finish photos, I am curious and have lots of questions...is that a Nova Chuck? Why did you switch to that? Did you still turn it with the face plate and 1/2 inch screws? What speed did you use? Was your success contingent on the Powerpro head stock?
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
-
terrydowning
- Platinum Member
- Posts: 1678
- Joined: Mon Jul 19, 2010 3:26 pm
- Location: Windsor, CO
Very nice result Fred.
Turning is IMHO the most addictive of the power wood working endeavors. Probably due to the speed of results. Once you get 1 good one done, you can't help yourself. You have a great turning setup with the PP and UTR.
Once you're concentric and balanced don't be afraid to increase the speed on the turning. You'll get better action from the tools and fewer catches. I would turn a bowl that size around 1,000 or so may be a bit faster. With Practice and experience you'll increase in confidence. Final sanding around 500 or so in reverse. One of these days I'll have a PP and be able to pull that off.
Very nice result on the first time out.
Turning is IMHO the most addictive of the power wood working endeavors. Probably due to the speed of results. Once you get 1 good one done, you can't help yourself. You have a great turning setup with the PP and UTR.
Once you're concentric and balanced don't be afraid to increase the speed on the turning. You'll get better action from the tools and fewer catches. I would turn a bowl that size around 1,000 or so may be a bit faster. With Practice and experience you'll increase in confidence. Final sanding around 500 or so in reverse. One of these days I'll have a PP and be able to pull that off.
Very nice result on the first time out.
--
Terry
Copy and paste the URLs into your browser if you want to see the photos.
1955 Shopsmith Mark 5 S/N 296860 Workshop and Tools
https://1drv.ms/i/s!AmpX5k8IhN7ahFCo9VvTDsCpoV_g
Public Photos of Projects
http://sdrv.ms/MaXNLX
Terry
Copy and paste the URLs into your browser if you want to see the photos.
1955 Shopsmith Mark 5 S/N 296860 Workshop and Tools
https://1drv.ms/i/s!AmpX5k8IhN7ahFCo9VvTDsCpoV_g
Public Photos of Projects
http://sdrv.ms/MaXNLX
-
JPG
- Platinum Member
- Posts: 35428
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
A full view(s) of this would be 'nice'!:rolleyes:
[ATTACH]19933[/ATTACH]
[ATTACH]19933[/ATTACH]
- Attachments
-
- stand2.jpg (25.37 KiB) Viewed 24818 times
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange