folding attic ladder

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderator: admin

User avatar
eagleta2
Gold Member
Posts: 195
Joined: Sat Jun 13, 2009 3:24 pm
Location: Ahwatukee (Phoenix), AZ

folding attic ladder

Post by eagleta2 »

Hi all.. it should not be a surprise that I would rather build something than buy an assembly kit to obtain it. I am also not a big fan of plans in most cases..,I usually draw it out on paper and create my own plan. I have no experience (other than frustration) in using sketch up. I also tend to stray from the point at times...lol

The problem : our home has the access to the attic in the garage and was merely a normal sized hole with a hatch cover. Some idiot (namely me) was working in the attic and stepped on a support that wasn't meant to be stepped on. After an 8 foot tumble to the cold hard floor, I realized that I enlarged the opening greatly. At least I wasn't hurt except for my pride.

The solution : I would like to build a fold up ladder to access the attic. Instead of purchasing as kit from the BB stores, I would really prefer to build one. Unfortunately I do not have the necessary knowledge about the springs and hardware and etc...
,
Does anyone have a plan that they can share to build one of these?

Maybe you have one in your home that you wouldn't mind sharing dimensions and hardware specifics of?

Or you just want to chime in to tell me that you think I've lost my mind and ought to just buy the kit...go ahead, I have thick skin. :-)

Thanks in advance for your help... I truly appreciate it

Geo
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

How about looking at one in the BB store and get some ideas?
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
User avatar
eagleta2
Gold Member
Posts: 195
Joined: Sat Jun 13, 2009 3:24 pm
Location: Ahwatukee (Phoenix), AZ

Post by eagleta2 »

Hi Bob

I had thought of it, but didn't know how the BB store would feel about me taking apart a kit and not buying it.

It also did not seem right to purchase it to only copy everything and return it...so I just thought I would inquire here to see if anyone could help.

Thanks
Geo
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

I have three in my domicile. One came with it. The other two I purchased and installed. The needed hardware to create one safely is just not found in yer typical store.

I recommend just buying one. There is enough work involved in installing it(creating a structurally sound opening etc.).;)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
terrydowning
Platinum Member
Posts: 1678
Joined: Mon Jul 19, 2010 3:26 pm
Location: Windsor, CO

Post by terrydowning »

I agree with JPG.

Ladders especially folding ladders are tricky business. If you ever plan on selling the house, A kit system from a reputable vendor is a better bet IMHO.

I just helped my Son in law with a cover for a telescoping system from Wagner he put in his attic. Son in law is not a wood worker, but managed to install the ladder safely, instructions were very accurate and very thorough. He just needed help with the door.
--
Terry
Copy and paste the URLs into your browser if you want to see the photos.

1955 Shopsmith Mark 5 S/N 296860 Workshop and Tools
https://1drv.ms/i/s!AmpX5k8IhN7ahFCo9VvTDsCpoV_g

Public Photos of Projects
http://sdrv.ms/MaXNLX
kalynzoo
Platinum Member
Posts: 829
Joined: Sat Jan 19, 2008 11:02 pm
Location: Los Angeles, CA

Post by kalynzoo »

Although I think Murphy Bed hardware might be modified to create a ladder, I also think that by the time you purchase or prepare dry faultless lumber for the ladder and the frame, and then find or purchase the hardware it will be far more cost effective to purchase a ceiling ladder. The ceiling ladder will be hidden from view, appreciated by only you, perhaps your time and talents would better be directed to a project you can point at.
JMHO
Gary Kalyn
Kalynzoo Productions
Woodworking
Porter Ranch/Northridge
Los Angeles, CA
User avatar
curiousgeorge
Platinum Member
Posts: 880
Joined: Tue Feb 27, 2007 1:00 am
Location: Fort Worth, Texas

Post by curiousgeorge »

IMHO. It would be cheaper and far safer to just buy the kit. Also you may want to check with your city codes. Some places do not allow ladder access to the attic from the garage because of the exhaust fumes from your car having access to the whole house through the attic.
George
Ft. Worth, TX.
Go TCU Froggies
saminmn
Gold Member
Posts: 366
Joined: Thu Mar 01, 2012 10:32 am
Location: Northfield, MN

Post by saminmn »

eagleta2 wrote:...an 8 foot tumble to the cold hard floor, I realized that I enlarged the opening greatly. At least I wasn't hurt except for my pride....
Geo
Wow! That's quite a fall. Glad you weren't hurt.

I agree with others about buying a unit. I do not think you could build one for the cost of a good assembly.

Like I said, glad you were not hurt.
Sam in Northfield, MN
A day without beer......could have been better :p :D :p
Mark V 500 - S/N 100990, Mark V 510 - S/N missing, SS Band Saw, SS 6" Belt Sander, SS 4" Jointer, SS Scroll Saw, SS DC3300
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Post by Ed in Tampa »

eagleta2 wrote:Hi all.. it should not be a surprise that I would rather build something than buy an assembly kit to obtain it. I am also not a big fan of plans in most cases..,I usually draw it out on paper and create my own plan. I have no experience (other than frustration) in using sketch up. I also tend to stray from the point at times...lol

The problem : our home has the access to the attic in the garage and was merely a normal sized hole with a hatch cover. Some idiot (namely me) was working in the attic and stepped on a support that wasn't meant to be stepped on. After an 8 foot tumble to the cold hard floor, I realized that I enlarged the opening greatly. At least I wasn't hurt except for my pride.

The solution : I would like to build a fold up ladder to access the attic. Instead of purchasing as kit from the BB stores, I would really prefer to build one. Unfortunately I do not have the necessary knowledge about the springs and hardware and etc...
,
Does anyone have a plan that they can share to build one of these?

Maybe you have one in your home that you wouldn't mind sharing dimensions and hardware specifics of?

Or you just want to chime in to tell me that you think I've lost my mind and ought to just buy the kit...go ahead, I have thick skin. :-)

Thanks in advance for your help... I truly appreciate it

Geo

Lowes sells a really nice unit made from wood and metal. My original was all wood with some metal hinges and things but the one I installed in 2006 came with an all metal ladder and hadware. The only wood is the frame and cover.
I love it first because it is rated to 300+ lbs I have no problem going up with a load. Second it is sturdy and does not creak and crack like the old wood one. Third the price as about $20 more than the same thing in all wood.

If you build one I would guess you will regret it. Too many hinges, counter weights and springs/gas cylinders to make it easy.

I think mine cost $100-$130 back in 2006 so I doubt if it is more than $150 now and you will be hard pressed to build it for less.
Ed in Tampa
Stay out of trouble!
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

The folding ladder in my garage ceiling was broken when we moved in. Just discovering how it's tricky business repairing it convinced me the newer versions available from BB stores is a far wiser investment. Jim
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
Post Reply