Question - Fresh Cut Oak for Table?

kschwarz20 · Post by **kschwarz20** » Tue May 28, 2013 3:02 pm

I had a 50 year old Red Oak cut down over the weekend. We had it cut into logs, and the bottom slice from right above the stump is about 24" to 30" across and about 5" thick (it is sort of star shaped). My wife noted it had an interesting shape and color banding, and she suggested might make an interesting side table.

I'm wondering a few things:
(1) Is there a best way to dry this piece so it minimizes cracking? How long should I let it dry before working with it or finishing it?
(2) If it cracks, (or to prevent cracking) should I drill some holes in the sides and glue some long dowels in? If so, should I do this now or after it dries for some time?
(3) The top (and bottom) of the table would be end grain which is different than anything I've ever done. Is there anything in particular I should think through in this configuration?
(4) What would be the best finish to use on this to seal the end grain and prevent cracking. How long should I wait to finish it. Should I finish the top and bottom?
(5) I'm thinking it would look best if I can keep the bark intact, but as it dries I expect the bark will peal off. Any suggestions for keeping the bark on or gluing it back as the wood dries?
(6) Any suggestions for leg designs for such a table? If I had thought of it I would have kept a log 3' long to turn a center spinal leg, but too late...
(6) Is this just a crazy idea that will tie up lots of time and create lots of frustration?

All suggestions appreciated!

Karl Schwarz
Centreville, VA

derekdarling · Post by **derekdarling** » Thu May 30, 2013 12:50 am

Just a thought, if it is going to crack, it will just crack. Once it does, and is dry enough to work with, leave the crack in it, and fabricate some butterfly inserts to span the gap and hold it together, Leave the crack in and it will have an interesting 'je ne se quoi' to it.

(I'm Canadian, so I get to use French. It means ' I don't know what', but in a classy way hee hee)

If I find a pic of what I am trying to describe, I'll post it.

charlese · Post by **charlese** » Thu May 30, 2013 2:31 am

I'll refer you to the current issue of WOODCRAFT magazine. If you don't have a Woodcraft store nearby, you can probably order on on the internet. There is an article by Tommy MacDonald about building a trestle table with a slab top. He also shows making and installing bow ties to stop cracks. Volume 9 No 53 June/July 13

Your wood may take a year or so to dry. You will find it will change in size during that time. If you have the space and patience this wood can make you a beautiful table.

beeg · Post by **beeg** » Thu May 30, 2013 10:18 am

Mill the log into 1.25" thick boards, then seal the ends with a greenwood end sealer. Stack up the boards with stickers and wait a year for them to dry.