I need a new rubber sleeve for drum sander.

donpol · Post by **donpol** » Wed Aug 07, 2013 8:40 am

I removed an old sanding sleeve from my sanding drum and tried to put a new one on. The drum came with a 1955 Mark V (fairly recent purchase) and this is the first time I've changed the paper. The new sleeve wouldn't stay on, and I can't tighten it any further. It seems as though the rubber may have sat for years and is compressed and stiff. There is nothing else wrong with the drum. I called Shopsmith and asked about buying a new rubber sleeve, but was told they don't sell them separately I would have to buy a whole new drum. The drum is fine, I'd hate to toss it because the sleeve is no good. I just need to find a replacement sleeve; any ideas?

billmayo · Post by **billmayo** » Wed Aug 07, 2013 9:05 am

I recently brought 2 of the lower rubber sleeves for the 6X48 belt sander from Shopsmith. I just checked that there was no part numbers on the packages. Please talk to Linda as she has always been able to find for me whatever part I needed even when it has never been listed in the catalog. An outstanding customer service person to deal with. She is very Shopsmith knowledgeable to where she has recommend a different solution/part that did function/work for what I was looking for. A real super lady.

I have one of the new sleeves mounted on the later model flat drive drum with new bearings which is available if you are unable to get a new sleeve from Shopsmith. I also have a reconditioned idler drum available along with other belt sander parts.

donpol · Post by **donpol** » Wed Aug 07, 2013 11:02 am

Bill,

Thanks for the info, I'll try calling her. The rubber sleeve that I need is for the 2 1/4" drum sander, not the belt sander. So far my belt sander is working well. Thanks again for the info.

SDSSmith · Post by **SDSSmith** » Wed Aug 07, 2013 11:31 am

I believe the drum sander replacement sleeve p/n is 503009, but please check with any of the customer service reps.

JPG · Post by **JPG** » Wed Aug 07, 2013 12:31 pm

SDSSmith wrote:I believe the drum sander replacement sleeve p/n is 503009, but please check with any of the customer service reps.

http://www.shopsmith.com/ownersite/itemfind.htm?item=503009&Submit=Find+Item

joshh · Post by **joshh** » Wed Aug 07, 2013 5:29 pm

Better order it quick before they triple the price

dusty · Post by **dusty** » Wed Aug 07, 2013 5:31 pm

joshh wrote:Better order it quick before they triple the price

Now why would you say a thing like that?:rolleyes:

delong94 · Post by **delong94** » Mon Mar 24, 2014 3:25 pm

Does anyone one know if the Drum Rubber Sleeve (503009) is still available?

SDSSmith · Post by **SDSSmith** » Mon Mar 24, 2014 3:30 pm

delong94 wrote:Does anyone one know if the Drum Rubber Sleeve (503009) is still available?

Yours for $7.80 plus shipping.

ChrisNeilan · Post by **ChrisNeilan** » Mon Mar 24, 2014 5:36 pm

This site is amazing...