Traveling Academy Schedule

Moderator: admin

User avatar
pinkiewerewolf
Platinum Member
Posts: 526
Joined: Mon Jan 07, 2008 10:13 pm
Location: Ca. Eureka area.

Post by pinkiewerewolf »

Thanks Rick, I'll have to check my finals schedule and class schedule to see if I can make a class in Ashland, Bend, or Reno.
SWMBO could also use it as a chance to check out Ashland. I found it to be a beautiful and interesting town last summer.
John, aka. Pinkie. 1-520, 1-510 & a Shorty, OPR. 520 upgrade, Band Saw, Jig Saw, scroll saw, Jointer, Jointech Saw Train.:) Delta Benchtop planer, Makita LS1016L 10" sliding compound miter saw, Trojan manf. (US Made)Miter saw work center, MiniMax MM16 bandsaw.
Squire of the Shopsmith. ...hmmmm, maybe knave, pawn, or wretch would be more appropriate for me.:D
paulmcohen
Platinum Member
Posts: 1578
Joined: Fri Dec 08, 2006 8:10 pm
Location: Beaverton, Oregon
Contact:

Post by paulmcohen »

dusty wrote:Yes, you may have a problem.

http://www.shopsmith.com/ownersite/travelingacademy/registernowSTATE.htm

The above link shows classes in Bend and Portland. Portland 528-5/30 and Bend 6/1-6/3 and Ashland 6/24-6/26.

The link gave me an error (there must be a required cookie) but when I did another search I got it. Thanks I am signed up for the Portland Wood Turning class.
Paul Cohen
Beaverton, OR
A 1982 500 Shopsmith brand upgraded to a Mark 7 PowerPro, Jointer, Bandsaw (with Kreg fence), Strip Sander, Ring Master and lots of accessories all purchased new
12" Sliding Compound Mitre Saw, 1200 CFM DC
User avatar
woodburner
Gold Member
Posts: 498
Joined: Fri Jul 21, 2006 2:35 am
Location: Visalia, CA
Contact:

Post by woodburner »

Hi Rick,

Any idea when you will be making it back to Central California?
Also, to comment on a earlier post, maybe they should change it from "Spouse can attend for free" to "Guest can attend for free". Maybe you can get more new owners that way. Just a thought.
Sawdust & Shavings,
Woodburner:o
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

Post 1 of this thread has been updated through July 20,2008.
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

Post 1 of this thread has been updated through August 9, 2008.:)
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

Post 1 of this thread has been updated through August 13, 2008.:)
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

The TA will be in Phoenix 08/30, 08/31 and 09/01 then it moves to Tucson 09/03, 09/04 and 09/05.

I've already registered.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

Post 1 of this thread has been updated through Sept. 5, 2008.:)

Hey, Dusty, that bit was not there yesterday!
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
iclark
Platinum Member
Posts: 630
Joined: Wed Apr 16, 2008 2:45 pm
Location: Hampton VA

this thread is much better than that web page

Post by iclark »

[quote="ricknwood"]Hey guys,
If you want to see where I will be and when, go to this site:
http://www.shopsmith.com/ownersite/trav ... gister.htm
[end QUOTE]

Rick,

going to the page that you suggest just shows us how much we should appreciate Tim doing this thread. (thank you, Tim)

perhaps ShopSmith should consider just how insulting that page is to the customers not in the lucky states. we keep getting pointers telling us to go to this site to see when the TA is coming to our area. for 46 of the 50 states, the search comes up empty. yet we are defaulted to looking for classes coming to a site within 50 miles of our zipcode or to picking our state. ShopSmith doesn't even have the courtesy of putting on that page that owners east of the Mississippi need not waste their time looking. it takes a while to find this forum and learn that there is only one TA instructor and that the TA no longer crosses the Appalachians.

at the very least, ShopSmith (you) should consider taking out the states in the pull down that will not be receiving visits from the TA in the next 2 or 3 years.

even better would be to put a list of the states with scheduled visits at the top of the page.

just some thoughts from an owner in Virginia tired of having my hopes raised.

Ivan
paulmcohen
Platinum Member
Posts: 1578
Joined: Fri Dec 08, 2006 8:10 pm
Location: Beaverton, Oregon
Contact:

Post by paulmcohen »

I spoke to Rick Friday at his Portland class (which my son and I loved) and he said he plans on doing on the East coast after completing the events scheduled. I think he mentioned Atlanta and I don't remember the other cities.

I agree the site needs work, and a simple list would be better given there is one Rick and how few places get visited.
Paul Cohen
Beaverton, OR
A 1982 500 Shopsmith brand upgraded to a Mark 7 PowerPro, Jointer, Bandsaw (with Kreg fence), Strip Sander, Ring Master and lots of accessories all purchased new
12" Sliding Compound Mitre Saw, 1200 CFM DC
Post Reply