Not sure but I think Roberts Saw uses a computer. If not they have been around for so long I would guess they have it memorized.billmayo wrote:Thanks ED. I have not done much sawing in the past couple years so still have a collection of new and sharpen blades to where I can discard them when they become gummed or dull. I have been using the $10 Harbor Freight 10" carbite tip blades with 5" blade stabliizers which is close enough for my woodworking tasks. I still have one or two really nice saw blades to use if I am cutting for any furniture type project.
I would go with the computer guided sharpening service if I was to do any sharpening in the future. I spent many hours trying to learn the sharpening techniques without much success.
sharpening saw blades
Moderator: admin
-
Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
Ed in Tampa
Stay out of trouble!
Stay out of trouble!
I emailed them some questions earlier, accidentally from my work email so it had my phone number in my signature. They called me back. Which bugs me. I emailed them because I don't like talking on the phone. If I wanted to talk to them on the phone, I would have called them. Also, I was away from my desk, so they left a message and didn't actually answer any questions. Just said to call them back.dusty wrote:Thanks for this post. If their blades are as impressive as their website they just might become an alternate to Forrest which is where I have had all my saw blades sharpened. I have them bookmarked.
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
JPG40504 wrote:Last I knew So Cal was on the far side of the Rio Grande.
Last I knew Bill was on the EAST coast. Knot So Cal.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
-
Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
heathicus wrote:I emailed them some questions earlier, accidentally from my work email so it had my phone number in my signature. They called me back. Which bugs me. I emailed them because I don't like talking on the phone. If I wanted to talk to them on the phone, I would have called them. Also, I was away from my desk, so they left a message and didn't actually answer any questions. Just said to call them back.
Hey at least they are looking for work. So many today act like they have a rich daddy if the business doesn't work.
Ed in Tampa
Stay out of trouble!
Stay out of trouble!
Yes, I will commend them for that. And I actually meant to get around to that aspect of it and it was the whole purpose I mentioned it. Most people aren't anti-social introverts like me and would prefer a phone conversation and the fact that they called rather than emailed (same day too!) does speak highly of them. I just don't like it.Ed in Tampa wrote:Hey at least they are looking for work. So many today act like they have a rich daddy if the business doesn't work.
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
-
terrydowning
- Platinum Member
- Posts: 1678
- Joined: Mon Jul 19, 2010 3:26 pm
- Location: Windsor, CO
I totally understand Heath and agree. I really hate talking on the phone as well (I thought I was the only one) and I absolutely refuse to give a low wage call center employee any credit card info over the phone EVER! I'm much more comfortable doing that online.
--
Terry
Copy and paste the URLs into your browser if you want to see the photos.
1955 Shopsmith Mark 5 S/N 296860 Workshop and Tools
https://1drv.ms/i/s!AmpX5k8IhN7ahFCo9VvTDsCpoV_g
Public Photos of Projects
http://sdrv.ms/MaXNLX
Terry
Copy and paste the URLs into your browser if you want to see the photos.
1955 Shopsmith Mark 5 S/N 296860 Workshop and Tools
https://1drv.ms/i/s!AmpX5k8IhN7ahFCo9VvTDsCpoV_g
Public Photos of Projects
http://sdrv.ms/MaXNLX
I don't recall but they all fit in a 12x12x6 USPS Priority Mail box (around $15). I talked with the owner's son (who I think manages things). He said with their machines they take off the minimal amount based on the tooth that is the lowest (or something like that). He said that assures all teeth are the same height and ground at the same angle. He told me that based on the way I take care of my blades they can go through a lot of sharpening before I will ever need another one. As I mentioned, I was really impressed with how sharp they were when I got them back. Once you find a good mechanic with decent prices there is never a reason to look for another one.beeg wrote:How much was the shipping charge they charged?
If you have someone who really does good work then keep using that person. If you are looking for a source this company is first class.
Well,
that may be; however, Dynamic Saw thinks so highly of us they have named a carbide tooth grind the California Triple Chip!JPG40504 wrote:Last I knew So Cal was on the far side of the Rio Grande.
Thanks for the tip db5.
Forrest
Forrest
Huntington Beach, CA
1985 500->510->520, bandsaw, jointer, planer, PowerPro, double-tilt, 3" casters,(now obsolete) speed increaser
Huntington Beach, CA
1985 500->510->520, bandsaw, jointer, planer, PowerPro, double-tilt, 3" casters,(now obsolete) speed increaser
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Geography lesson aka continuity.
Guy in So Cal requests help finding a 'local' sharpening service.
He is referred to a place in NY.
Advice is offered from Fla.
Some SA pointed out So Cal and Fla on opposite banks.
It was pointed out that another Fla 'helper' was not in So Cal but Fla.
Guy in So Cal acknowledges river bank 'detail' and touts the NY sharpener.
Why is my head hurting?;)
Guy in So Cal requests help finding a 'local' sharpening service.
He is referred to a place in NY.
Advice is offered from Fla.
Some SA pointed out So Cal and Fla on opposite banks.
It was pointed out that another Fla 'helper' was not in So Cal but Fla.
Guy in So Cal acknowledges river bank 'detail' and touts the NY sharpener.
Why is my head hurting?;)
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
[quote="JPG40504"]Geography lesson aka continuity.
Guy in So Cal requests help finding a 'local' sharpening service.
He is referred to a place in NY.
Advice is offered from Fla. To another Floridan.
Some SA pointed out So Cal and Fla on opposite banks.
It was pointed out that another Fla 'helper' was not in So Cal but Fla.
Guy in So Cal acknowledges river bank 'detail' and touts the NY sharpener.
Why is my head hurting?]
Define "SA".
Guy in So Cal requests help finding a 'local' sharpening service.
He is referred to a place in NY.
Advice is offered from Fla. To another Floridan.
Some SA pointed out So Cal and Fla on opposite banks.
It was pointed out that another Fla 'helper' was not in So Cal but Fla.
Guy in So Cal acknowledges river bank 'detail' and touts the NY sharpener.
Why is my head hurting?]
Define "SA".
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob