I was going through some of my late father's tools and came across some SS Scroll blades and these 2 sets of blade "clamps". I knew he had an early model SS Scroll Saw at one time but need to confirm if these blade "clamps" are for a Shopsmith scroll saw. Thanks for any response.
Don
[ATTACH]22896[/ATTACH]
Is this blade assembly for a SS Scroll Saw?
Moderator: admin
-
sawduster2
- Bronze Member
- Posts: 1
- Joined: Tue Oct 01, 2013 3:10 pm
Is this blade assembly for a SS Scroll Saw?
- Attachments
-
- scroll saw blade clamp rev.jpg (118.67 KiB) Viewed 3415 times
I do not believe that they are for a Shopsmith scroll saw, the holes used to mount the blocks in the saw are not oriented correctly.sawduster2 wrote:I was going through some of my late father's tools and came across some SS Scroll blades and these 2 sets of blade "clamps". I knew he had an early model SS Scroll Saw at one time but need to confirm if these blade "clamps" are for a Shopsmith scroll saw. Thanks for any response.
Don
[ATTACH]22896[/ATTACH]
Rob in San Diego
Email: SDSSmith51 AT gmail.com
Email: SDSSmith51 AT gmail.com
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
I agree, but think the holes are not for mounting. The pins are I believe are for mounting to a saw(of unknown origin).SDSSmith wrote:I do not believe that they are for a Shopsmith scroll saw, the holes used to mount the blocks in the saw are not oriented correctly.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
I do not believe they are for the Shopsmith Scroll Saw. I have one of the older model scroll saws and this is what mine look like.sawduster2 wrote:I was going through some of my late father's tools and came across some SS Scroll blades and these 2 sets of blade "clamps". I knew he had an early model SS Scroll Saw at one time but need to confirm if these blade "clamps" are for a Shopsmith scroll saw. Thanks for any response.
Don
[ATTACH]22896[/ATTACH]
[ATTACH]22897[/ATTACH]
- Attachments
-
- scroll saw blade 001 (Custom).JPG (13.74 KiB) Viewed 3401 times
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
