It Has Been Good Working With You
Moderator: admin
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
It Has Been Good Working With You
If I suddenly go "incommunicado", it shall be due to my loss of computer capability. I am loosing one right after the other. Three in the last week have developed serious problems of one kind or another.
If that should happen, I'll check in now and then when I have access to one of the kids computers.
[ATTACH]23098[/ATTACH]
If that should happen, I'll check in now and then when I have access to one of the kids computers.
[ATTACH]23098[/ATTACH]
- Attachments
-
- OH NO.jpg (29.01 KiB) Viewed 1692 times
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Keeping our fingers crossed!:)dusty wrote:If I suddenly go "incommunicado", it shall be due to my loss of computer capability. I am loosing one right after the other. Three in the last week have developed serious problems of one kind or another.
If that should happen, I'll check in now and then when I have access to one of the kids computers.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
I am having trouble with my laptop. SweetPacks has taken over and I have tried all kinds of stuff to get it off. I thank I really made it mad, I went in and deleated a lot of stuff I did not know what it was and had not downloaded it and now I really have popups. In my control panel it had downloaded 15 different things all in one day, so I deleated all of them now it is worse.

Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
- fredsheldon
- Platinum Member
- Posts: 1175
- Joined: Tue Jan 17, 2012 1:31 pm
- Location: The Woodlands, Texas
Sounds like you need to sign up with the Geek Squad. For $9 a month you get unlimited telephone/vpn support after an initial investment of $99. If they can't fix it remotely, you take it in to the nearest Best Buy.
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
fredsheldon wrote:Sounds like you need to sign up with the Geek Squad. For $9 a month you get unlimited telephone/vpn support after an initial investment of $99. If they can't fix it remotely, you take it in to the nearest Best Buy.
And pay someone to do what I can eventually do? Never Happen!
Besides, I have my own Geek Squad. I have three grand kids and a grandson-in-law that together can do it all - "when you can get time with them". Steaks or ribs on the grill usually brings that about
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Progress is slow but there is progress. I have two computers back up and working. One is a small Dell desktop that is slated to be the computer in the RV. I plan to shock mount it and install it into a seldom used cabinet space under the table.
The other is suppose to be in the shop, functioning as my Sketchup and Autocad computer. It also loads the shop budget and equipment inventory.
The third is the one that I really need to recover. It is the old gaming computer. I've made some progress but very little. This one has Windows 7 and all of my latest applications programs. It boots but then hangs without starting Windows. I suspect bad memory BUT there are no beep tones and no error messages.
No sawdust. That is what I am really missing. I need a sawdust fix but the doctor is holding firm. NO SHOP ACTIVITY.
The other is suppose to be in the shop, functioning as my Sketchup and Autocad computer. It also loads the shop budget and equipment inventory.
The third is the one that I really need to recover. It is the old gaming computer. I've made some progress but very little. This one has Windows 7 and all of my latest applications programs. It boots but then hangs without starting Windows. I suspect bad memory BUT there are no beep tones and no error messages.
No sawdust. That is what I am really missing. I need a sawdust fix but the doctor is holding firm. NO SHOP ACTIVITY.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
I have, for the time being, set my goto computer aside. I have to read more about how to attack this one. It seems that it hangs toward the end of the POST and before it starts loading the OS.
No error messages and no beep tones. NO CLUES.
No error messages and no beep tones. NO CLUES.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.