Rust on my chuck

teamtj · Post by **teamtj** » Thu Oct 24, 2013 11:51 am

My 12-year old daughter and I just spent some time in the shop...well, we pulled the SS out of the shop onto the driveway because it is so nice today...and were doing a little horizontal boring for a project we've been working on.

I noticed some rust on my never-been-used chuck. What gives?

Any idea what causes that and how to take care of it?

Thanks!

teamtj · Post by **teamtj** » Thu Oct 24, 2013 11:53 am

Forgot to add the picture...

charlese · Post by **charlese** » Thu Oct 24, 2013 12:22 pm

teamtj wrote:My 12-year old daughter and I just spent some time in the shop...well, we pulled the SS out of the shop onto the driveway because it is so nice today...and were doing a little horizontal boring for a project we've been working on.

I noticed some rust on my never-been-used chuck. What gives?

Any idea what causes that and how to take care of it?

Thanks!

Only the obvious:rolleyes: Evidently the chuck picked up some moisture while stored. A little WD-40 sprayed on the chuck will prevent more rust and may even help loosen the light oxidation that's already there.

terrydowning · Post by **terrydowning** » Thu Oct 24, 2013 12:27 pm

WD-40 and a brass brush to remove.

There is always moisture in the air moisture + steel/iron = rust. Keep it coated with WD-40 or good old JPW.

rcplaneguy · Post by **rcplaneguy** » Thu Oct 24, 2013 1:39 pm

It is amazing how fast rust will appear in the right conditions. Glad you caught it early.

fredsheldon · Post by **fredsheldon** » Thu Oct 24, 2013 3:18 pm

Drop it into a can of EvapoRust over night and presto, the next morning, rust all gone, including what you can't see inside.

curiousgeorge · Post by **curiousgeorge** » Thu Oct 24, 2013 3:40 pm

Fred, living in the high humidity Houston area, I would think that you would be well acquainted with rust and it's "mysterious" appearance on all things iron/steel. Humidity is the bane of all tools. WD40 and Johnson's Paste Wax are the best one two punch in combating it. IMHO

charlese · Post by **charlese** » Thu Oct 24, 2013 8:04 pm

I know of one certain method to prevent any steel/iron rust on woodworking equipment. Once set up, you'll never need any rust prevention efforts. Of course, you will need a roof and a dry floor and walls.

What's the method? Move to the Mojave desert. Haven't had a speck of rust on anything in the shop since leaving South Texas. That's a decade ago.

Shopsmith Forums

Rust on my chuck

Rust on my chuck

No Rust allowed