My First Attempt at Bowl Making
Moderator: admin
- fredsheldon
- Platinum Member
- Posts: 1175
- Joined: Tue Jan 17, 2012 1:31 pm
- Location: The Woodlands, Texas
Branding Iron
[ATTACH]23325[/ATTACH]
This is the Branding Iron I used to apply my name. I had to remove the date attachment so I could 'rock' the brand to get a good transfer of heat. I will add the date later. Lesson learned: I found that by recessing the bottom on some of my smaller bowls it was difficult to flatten the bottom with the drum sander.
This is the Branding Iron I used to apply my name. I had to remove the date attachment so I could 'rock' the brand to get a good transfer of heat. I will add the date later. Lesson learned: I found that by recessing the bottom on some of my smaller bowls it was difficult to flatten the bottom with the drum sander.
- Attachments
-
- 2013-11-23_18-34-04_524.jpg (167.95 KiB) Viewed 14480 times
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
"Fools name and faces . . . . ".
Seriously that looks very nicely done. I hope the recipients appreciate the effort!;)
Seriously that looks very nicely done. I hope the recipients appreciate the effort!;)
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Rig up a clamp to mount the iron to the quill when doing repetitive branding???
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- fredsheldon
- Platinum Member
- Posts: 1175
- Joined: Tue Jan 17, 2012 1:31 pm
- Location: The Woodlands, Texas
algale wrote:Don't take this the wrong way, Fred, but I think you need an intervention! I have never seen so many bowls!
I have a full time job and participate in radio controlled sailboat races all over the country and play several characters in World of Warcraft in my spare time when not making bowls
Fred
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
You've got a lot more energy than I do. I admire the workmanship and the output. Both are impressive. Even more so when you point out that you are working full time and have other hobbies.fredsheldon wrote:I have a full time job and participate in radio controlled races all over the country and play several characters in World of Warcraft in my spare time when not making bowlsI try to keep busy.
Fred
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
- joshh
- Platinum Member
- Posts: 723
- Joined: Tue Jan 08, 2013 8:53 pm
- Location: Dallas / Fort Worth, Texas
fredsheldon wrote:...and play several characters in World of Warcraft in my spare time
Wait wait wait...WHAT?!
I gave up that addiction a couple of years ago when I reached over 5,000 hours played
- 1986 Mark V 500 Mini
- 1985 Mark V 510 with reversible motor, bandsaw, jointer, and double-tilt.
I offer quality motor reversal, rebuilding, and rewiring. Contact me at HarbourTools@live.com
- 1985 Mark V 510 with reversible motor, bandsaw, jointer, and double-tilt.
I offer quality motor reversal, rebuilding, and rewiring. Contact me at HarbourTools@live.com
- fredsheldon
- Platinum Member
- Posts: 1175
- Joined: Tue Jan 17, 2012 1:31 pm
- Location: The Woodlands, Texas
I've been playing almost daily since it came out 8 years ago. I have almost 200,000 kills. I play it because I read somewhere it keeps your brain active and that's a good thing. Yes, when it first came out under the original ranking formula which required you to play daily or lose rank, I was playing at least 8 hours a day after work and 22 hours a day on weekends and holidays to maintain my rank of Lt. General. This lasted for 3 years.joshh wrote:Wait wait wait...WHAT?!
I gave up that addiction a couple of years ago when I reached over 5,000 hours played
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
So you back down to private!:eek::Dfredsheldon wrote:I've been playing almost daily since it came out 8 years ago. I have almost 200,000 kills. I play it because I read somewhere it keeps your brain active and that's a good thing. Yes, when it first came out under the original ranking formula which required you to play daily or lose rank, I was playing at least 8 hours a day after work and 22 hours a day on weekends and holidays to maintain my rank of Lt. General. This lasted for 3 years.It was an addiction for millions worldwide, lot's of kids flunked out of college. Now I only devote 2 hours a night to the game.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- joshh
- Platinum Member
- Posts: 723
- Joined: Tue Jan 08, 2013 8:53 pm
- Location: Dallas / Fort Worth, Texas
You might remember 40 player raids then!
You might enjoy these:
When undead stratholme used to be a 10 player dungeon...we did it with 5 at the time.
http://youtu.be/LXE5oqG_qoo (I'm the rogue in the ninja suit)
Server first (Horde side) clearing Molten Core. Trying to get 40 GOOD players together at the same time willing to spend 3-4 hours straight playing was very tough. Anyone does anything wrong...you all die
http://youtu.be/OOAzHs1iLPo
Server first (Horde side) clearing Blackwing Lair (40 player again, but much much harder). First boss fight...complete chaos: http://youtu.be/vMRA9FsB_7k.
YouTube pulled the music for "copyright" as if it was being sold...
Send me a PM if you are interested and I'll link you some more videos
You might enjoy these:
When undead stratholme used to be a 10 player dungeon...we did it with 5 at the time.
http://youtu.be/LXE5oqG_qoo (I'm the rogue in the ninja suit)
Server first (Horde side) clearing Molten Core. Trying to get 40 GOOD players together at the same time willing to spend 3-4 hours straight playing was very tough. Anyone does anything wrong...you all die
Server first (Horde side) clearing Blackwing Lair (40 player again, but much much harder). First boss fight...complete chaos: http://youtu.be/vMRA9FsB_7k.
Send me a PM if you are interested and I'll link you some more videos
- 1986 Mark V 500 Mini
- 1985 Mark V 510 with reversible motor, bandsaw, jointer, and double-tilt.
I offer quality motor reversal, rebuilding, and rewiring. Contact me at HarbourTools@live.com
- 1985 Mark V 510 with reversible motor, bandsaw, jointer, and double-tilt.
I offer quality motor reversal, rebuilding, and rewiring. Contact me at HarbourTools@live.com