Jewelry Box Plans for Christmas Presents

fredsheldon · Post by **fredsheldon** » Tue Dec 17, 2013 8:30 am

I am thinking about making jewelry boxes for Christmas presents for everybody next year using my bandsaw. Does anybody have plans for making those neat looking boxes where the drawers are cut out of the block of wood in different shapes? I've retired my lathe after making 50 pen and letter opener kits and 90 bowls over the previous 2 years. It's time to move on to something new and one that doesn't generate so much sawdust.

dusty · Post by **dusty** » Tue Dec 17, 2013 8:43 am

Have you tried "Google". Say maybe "band saw box patterns" or "band saw box plans".

rcplaneguy · Post by **rcplaneguy** » Tue Dec 17, 2013 9:10 am

Here is one fellow's idea...
http://www.thewoodwhisperer.com/viewer-projects/ohio-bandsaw-box/

fredsheldon · Post by **fredsheldon** » Tue Dec 17, 2013 10:01 am

I have been inspired. Time to go out and start cutting out some blanks from my stock of oak and walnut logs.

fredsheldon · Post by **fredsheldon** » Tue Dec 17, 2013 3:35 pm

ADMIN, please correct my misspelling of Jewelry.

Thanks,
Fred Sheldon

JPG · Post by **JPG** » Tue Dec 17, 2013 3:50 pm

fredsheldon wrote:ADMIN, please correct my misspelling of Jewelry.

Thanks,
Fred Sheldon

Looks good 15 min later!;)

joedw00 · Post by **joedw00** » Tue Dec 17, 2013 10:55 pm

Here are some I found:

Here is a free pattern and the instructions. The second link is for a full size pattern of the box.
http://americanwoodworker.com/blogs/pro ... w-box.aspx.

http://americanwoodworker.com/blogs/pro ... ttern.aspx

http://www.jeffgreefwoodworking.com/pnc ... index.html

Here is a goodVideo of a band saw heart box

fredsheldon · Post by **fredsheldon** » Wed Dec 18, 2013 12:16 am

Joe, great video of the heart box build. Thanks.
Fred

fredsheldon · Post by **fredsheldon** » Wed Dec 18, 2013 4:14 pm

I need some advice on how to create blocks from my wood supply made up of mostly 2 foot long 12" to 15" diameter logs that have been drying since the first of the year. I will be making bandsaw Jewelry Boxes. Or will they even work?

Thanks in advance for any advice you might be able to provide,
Fred

terrydowning · Post by **terrydowning** » Wed Dec 18, 2013 6:23 pm

Saw the logs in half and remove the pith.

Depending on width of blank/board desired either plain saw or quarter saw with your band saw.

Sticker stack these and let them continue to dry. The wood in the center of your 12-15 inch log has probably not reached EMC yet. On average figure 1 year of drying time per inch thickness of material (This is an average and is not absolute, temperature and humidity in your storage area as well as wood characteristics control the drying time.)

Cut your blank/boards larger than finished dimension then cut your lumber to final dimension once the wood has reached EMC and you're ready to build a box.

Quarter sawing the wood will give you the most stable wood. Plain sawing can give the best figure.

Shopsmith Forums

Jewelry Box Plans for Christmas Presents

Jewelry Box Plans for Christmas Presents

Admin Admin Admin