Remote Switch

Create a review for a woodworking tool that you are familiar with (Shopsmith brand or Non-Shopsmith) or just post your opinion on a specific tool. Head to head comparisons welcome too.

Moderator: admin

User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Post by Ed in Tampa »

Wow I didn't know X10's were effected by power outages. I was seriously considering installing some in various places in my house. At my house we experience a power outage (momentary lost) about once every couple of days. My stove has a PF (power failure) light that I have to turn off nearly every other day.
Usually when we buy something we insist it has battery or capacitor back up, somehow this latest stove slipped through. Well at least my wife can't rid of me I'm the only one that know how to set the stupid stove's clock after each failure.
We usually lose power everytime I'm writing the last sentence in a long report or something. Love it when I get to start over.
Ed
paulmcohen
Platinum Member
Posts: 1578
Joined: Fri Dec 08, 2006 8:10 pm
Location: Beaverton, Oregon
Contact:

Post by paulmcohen »

Ed in Tampa wrote:We usually lose power everytime I'm writing the last sentence in a long report or something. Love it when I get to start over.
Ed

All our computers have a UPS, some can only run for a few minutes but it is long enough to go through a momentary glitch. Small ones are very cheap and they also protect against line issues. If you get one from a major company they will guarantee the equipment will not be damaged from power spikes as well.
Paul Cohen
Beaverton, OR
A 1982 500 Shopsmith brand upgraded to a Mark 7 PowerPro, Jointer, Bandsaw (with Kreg fence), Strip Sander, Ring Master and lots of accessories all purchased new
12" Sliding Compound Mitre Saw, 1200 CFM DC
User avatar
rkh2
Platinum Member
Posts: 602
Joined: Thu Jul 20, 2006 10:56 am
Location: Lewisburg, TN

Post by rkh2 »

Just bringing up a heads up from this old thread about the remote switch for the dust collector which is currently on sale. I have this unit and love it, however I experienced my dust collector turned on and running after a recent thunderstorm so now when I am done in my shop after shutting the DC off with the remote, I also shut the DC off by the switch on the unit to prevent this from happening again.
Ron from Lewisburg, TN
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Remore Switch

Post by dusty »

rkh2 wrote:Just bringing up a heads up from this old thread about the remote switch for the dust collector which is currently on sale. I have this unit and love it, however I experienced my dust collector turned on and running after a recent thunderstorm so now when I am done in my shop after shutting the DC off with the remote, I also shut the DC off by the switch on the unit to prevent this from happening again.


I don't have the remote control except on some lights but I unplug the shop equipment from the wall outlets whenever I am going to be absent from the shop.

I do this mainly to stay out of trouble with SWMBO. One day she and a daughter were standing in the doorway (I was gone and had been fro a while) very near the air compressor. You guessed it. Startled both of them. I caught it along with orders to not leave "that thing" on ever again when I was not using it.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
judaspre1982
Platinum Member
Posts: 1237
Joined: Tue Jul 08, 2008 10:10 pm

Post by judaspre1982 »

=======================
Last edited by judaspre1982 on Sun May 14, 2017 11:55 am, edited 1 time in total.
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

dusty wrote:...I do this mainly to stay out of trouble with SWMBO. One day she and a daughter were standing in the doorway (I was gone and had been fro a while) very near the air compressor. You guessed it. Startled both of them. I caught it along with orders to not leave "that thing" on ever again when I was not using it.
Boy does that sound familiar!!! :D My wife HATES it when my compressor comes on automatically. I try very hard to remember to turn it off befor ascending those stairs!
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
paulmcohen
Platinum Member
Posts: 1578
Joined: Fri Dec 08, 2006 8:10 pm
Location: Beaverton, Oregon
Contact:

Post by paulmcohen »

rkh2 wrote:Just bringing up a heads up from this old thread about the remote switch for the dust collector which is currently on sale. I have this unit and love it, however I experienced my dust collector turned on and running after a recent thunderstorm so now when I am done in my shop after shutting the DC off with the remote, I also shut the DC off by the switch on the unit to prevent this from happening again.

I have a Jet collector and went out to the garage over the weekend and the DC was running. The remote was safely put away, I also suspect a power glitch causing the issue.
Paul Cohen
Beaverton, OR
A 1982 500 Shopsmith brand upgraded to a Mark 7 PowerPro, Jointer, Bandsaw (with Kreg fence), Strip Sander, Ring Master and lots of accessories all purchased new
12" Sliding Compound Mitre Saw, 1200 CFM DC
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

rkh2 wrote:Just bringing up a heads up from this old thread about the remote switch for the dust collector which is currently on sale. I have this unit and love it, however I experienced my dust collector turned on and running after a recent thunderstorm so now when I am done in my shop after shutting the DC off with the remote, I also shut the DC off by the switch on the unit to prevent this from happening again.
I have a couple of touch lamps that turn on by themselves too, when there is an anomaly with electricity.
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
User avatar
ryanbp01
Platinum Member
Posts: 1509
Joined: Mon Jun 25, 2007 4:43 pm
Location: Monroeville, IN

Post by ryanbp01 »

Not only does my dust collector come on as well, but when I have a brief power outage, I find the T.V. in my hobby room comes on!

BPR
Post Reply