Sewing pattern for shop apron?

Moderator: admin

Post Reply
User avatar
S Brian
Gold Member
Posts: 163
Joined: Mon Mar 01, 2010 7:52 pm
Location: South Bend, In

Post by S Brian »

No pattern info here, but a design tip. I have two aprons, both sold by Lee Valley. The first one (old style) has a neck strap. The new style has crossing straps that hang on your shoulder, with quick clips on both shoulder straps and waist strap and it is VERY COMFORTABLE. :cool: See a picture at their web page. It also has side access pockets, which will not fill up with sawdust and chips.:D
Brian
Mark V-500 Purchased New In 1980, SS Bandsaw (free), SS Jointer, SS 6x48 Belt Sander (free), SS Storage Station (free), Powermatic 64A Table Saw, Powermatic 1140F Drill Press, Delta 46-460 Midi-Lathe, Delta Scrollsaw, Bosch 12" Dual Compound Miter Saw, MLCS Router Table w/Bosch Router, Penn State dust collector.
Top
User avatar
danr
Gold Member
Posts: 100
Joined: Sun Nov 17, 2013 1:39 pm
Location: Longmont, Colorado

Velcro tip

Post by danr »

Another tip: my wife made one for me based on a "shopsmith" apron but her version uses Velcro instead of tie straps. That way I don't have to fumble behind my back, just stick to the sides:D
Dan
Top
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

d.rositer wrote:Another tip: my wife made one for me based on a "shopsmith" apron but her version uses Velcro instead of tie straps. That way I don't have to fumble behind my back, just stick the to the sides:D
Dan
A common 'ploy' amongst the arthritic set!:D:D:D
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

I didn't find a pattern but I found a picture you can make one off of...


[ATTACH]23775[/ATTACH]
:D

.
Attachments
apron.jpg
apron.jpg (5.26 KiB) Viewed 4280 times
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
Top
User avatar
heathicus
Platinum Member
Posts: 2648
Joined: Wed Oct 22, 2008 1:02 am
Location: WhoDat Nation

Post by heathicus »

:p :D

That might make my butt look big...
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
Top
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Post by Ed in Tampa »

heathicus wrote::p :D

That might make my butt look big...

Your butt is looks big because it is big!:D
Ed in Tampa
Stay out of trouble!
Top
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

Ed in Tampa wrote:Your butt is looks big because it is big!:D
Why you been looking at his butt Ed?:rolleyes:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
User avatar
heathicus
Platinum Member
Posts: 2648
Joined: Wed Oct 22, 2008 1:02 am
Location: WhoDat Nation

Post by heathicus »

Maybe he likes big butts! :D
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
Top
User avatar
joshh
Platinum Member
Posts: 723
Joined: Tue Jan 08, 2013 8:53 pm
Location: Dallas / Fort Worth, Texas

Post by joshh »

This thread has taken a turn for the worse :eek:
- 1986 Mark V 500 Mini

- 1985 Mark V 510 with reversible motor, bandsaw, jointer, and double-tilt.

I offer quality motor reversal, rebuilding, and rewiring. Contact me at HarbourTools@live.com
Top
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

joshh wrote:This thread has taken a turn for the worse :eek:


Before long it will hit bottom... :rolleyes: :D


.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
Top
Post Reply

Return to “Community”