Another Project Done!!

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderator: admin

Post Reply
User avatar
aloibl
Gold Member
Posts: 106
Joined: Mon Mar 14, 2011 3:20 pm
Location: Austin, Texas

Another Project Done!!

Post by aloibl »

This project started because I was concerned about my cat. With our existing cat tree that we had she was jumping from the top level, about five feet, down to the floor when she was done eating her snack. And she is not as young as she used to be so I thought that I needed to make her a new cat tree. Of course I figured if I was going to build something that it had to be unique and also had to go outside the box of what I had tried so far.

So first I came up with an idea and put the basics into a sketch-up drawing to see how it would look. After being satisfied that my idea had merit I just needed to figure out how I was going to build it. I found a cedar 4x4 at my work and took it home and turned it round. Of course I had to do this in two sections in order to get enough height. Also needed to turn down the cedar where the individual shelves needed to go. Note to self. Make sure next time you do this that you make these all the same widths and depth. But since I didn't every shelf had to be unique when it came to its final thickness and diameter of the slot that it went into.

Of course I had to put the two sections together and luckily I found the exact center of both pieces so that when I screwed them together they were almost perfect. I cut the carpet for the shelves and I initially was going to just glue the carpet to the top of the shelves but I didn't like the look of that. So I ended up using my router and routing in a indention into the shelves that way the edges of the carpet would not show.

Glued in the shelves, added the base and the box to the top and there you have it. The carpet and the plywood used in the bottom of the box is the only thing I bought. All of the rest of the wood was recycled wood. Of course I provided you pics.
Attachments
DSC_7846.jpg
DSC_7846.jpg (226.62 KiB) Viewed 1631 times
DSC_7848.jpg
DSC_7848.jpg (266.09 KiB) Viewed 1567 times
DSC_7849.jpg
DSC_7849.jpg (229.84 KiB) Viewed 1567 times
DSC_7851.jpg
DSC_7851.jpg (161.14 KiB) Viewed 1596 times
DSC_7853.jpg
DSC_7853.jpg (257.96 KiB) Viewed 1596 times
Alan - Austin, Texas

Shopsmith Mark V (1984), Bandsaw, Joiner, Belt sander, jig saw, planer, router table, biscuit jointer, Porter jig,
User avatar
dgale
Platinum Member
Posts: 1007
Joined: Fri Jul 13, 2012 1:17 am
Location: Dows Prairie, CA

Post by dgale »

Looks great!
'78 Mark V 500 #27995 (my Dad bought new)
'82 Mark V 500 #96309
Two '47 10E's (serial#4314+6149) - one a dedicated drill press and the other a lathe
Two 10E/ER in parts slowly being restored…#26822 and #????? (SS plate missing)
SPT's: Bandsaw, Belt Sander, Strip Sander, Jointer, Jigsaw, Biscuit Joiner
User avatar
curiousgeorge
Platinum Member
Posts: 880
Joined: Tue Feb 27, 2007 1:00 am
Location: Fort Worth, Texas

Post by curiousgeorge »

Good job, Alan. Looks nice and I'm sure kitty will love it.
George
Ft. Worth, TX.
Go TCU Froggies
User avatar
BuckeyeDennis
Platinum Member
Posts: 3815
Joined: Tue Jul 24, 2012 10:03 pm
Location: Central Ohio

Post by BuckeyeDennis »

Nice dovetails!

I do hope that the cat will appreciate all the work that you put into building the tree. But as a cat owner myself ...

[ATTACH]24107[/ATTACH]
Attachments
animals-cat-kitten-kitty-pet-pet_owners-tnun71l (1).png
animals-cat-kitten-kitty-pet-pet_owners-tnun71l (1).png (161.78 KiB) Viewed 1678 times
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

Great job. I know my two girls would have enjoyed that. In fact, I would probably had to build two. Being litter sisters, they did not share most things that they liked.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

Hey, that's cool!
As I read the original post I was picturing something different... I did a Google image search on, cat tree, and found this one. I made the mistake of showing it to my wife and she is already looking for a spot for it. :)
http://www.pinterest.com/pin/12103492718864471/

We are owned by 3 cats...


.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
User avatar
john
Platinum Member
Posts: 1048
Joined: Mon Mar 05, 2007 7:42 pm
Location: St. Lambert , Quebec

Post by john »

Nice Job!

The cat should love it, and I'm sure you saved a bundle considering the outrageous prices for these in stores.

John
User avatar
skou
Platinum Member
Posts: 1944
Joined: Fri Feb 16, 2007 2:53 am
Location: Mesa (near Phoenix) Az

Post by skou »

Considering my cat condo is made out of thick-wall cardboard tubing, and some plywood "shelves" this looks GREAT to me, except for one thing.

Mine (a commercially manufactured one, that I was given) is covered with carpet. And, we ALL know how cats LOVE to shred carpet. (Much better the condo, than the floor.)

Dusty, my 2 boys are littermates as well, and also, twins. They both look like the famous Morris, except one of them has a few black whiskers. (And I'm glad about the whiskers, it's the only way to tell them apart.) They (well, since I got them fixed) get along just fine, and will even sit next to each other on the top level of their condo.

Thanks for the post, Alan. Now I have something else to do with my stretch model ER lathe.

steve
User avatar
skou
Platinum Member
Posts: 1944
Joined: Fri Feb 16, 2007 2:53 am
Location: Mesa (near Phoenix) Az

Post by skou »

Considering my cat condo is made out of thick-wall cardboard tubing, and some plywood "shelves" this looks GREAT to me, except for one thing.

Mine (a commercially manufactured one, that I was given) is covered with carpet. And, we ALL know how cats LOVE to shred carpet. (Much better the condo, than the floor.)

Dusty, my 2 boys are littermates as well, and also, twins. They both look like the famous Morris, except one of them has a few black whiskers. (And I'm glad about the whiskers, it's the only way to tell them apart.) They (well, since I got them fixed) get along just fine, and will even sit next to each other on the top level of their condo.

Thanks for the post, Alan. Now I have something else to do with my stretch model ER lathe.

steve
Post Reply