6" Joiner
Moderator: admin
6" Joiner
A local Total Shop owner has listed his Total Shop clone along with what I believe is a total shop 6" joiner. If anyone is still interested in obtaining a 6" joiner that will operate on the Shopsmith, please let me know. Shipping may be expensive as I believe this joiner weights more than 70 pd max that the USPS will ship. I will visit the owner and actually measure the joiner width if anyone is truly interested.
Bill Mayo bill.mayo@verizon.net
Shopsmith owner since 73. Sell, repair and rebuild Shopsmith, Total Shop & Wood Master headstocks, SPTs, attachments, accessories and parts. US Navy 1955-1975 (FTCS/E-8)
Shopsmith owner since 73. Sell, repair and rebuild Shopsmith, Total Shop & Wood Master headstocks, SPTs, attachments, accessories and parts. US Navy 1955-1975 (FTCS/E-8)
Can you send me an email with some idea of the max you will pay for the 6" joiner so I have an idea of you are willing to pay. That way I can see if the seller is within my ball field so we can play with some numbers. I do have an extra set of 6" joiner blades for the TS joiner.e2512 wrote:Hi Bill. I'm interested in the jointer. Shipping won't be a problem if you can hold it for me. I'll pick it up on one of my trips to Florida this summer. Tom
Bill Mayo bill.mayo@verizon.net
Shopsmith owner since 73. Sell, repair and rebuild Shopsmith, Total Shop & Wood Master headstocks, SPTs, attachments, accessories and parts. US Navy 1955-1975 (FTCS/E-8)
Shopsmith owner since 73. Sell, repair and rebuild Shopsmith, Total Shop & Wood Master headstocks, SPTs, attachments, accessories and parts. US Navy 1955-1975 (FTCS/E-8)
The 6" joiner is one heavy piece of machinery. Shipping would be very expensive. I have repair parts for the 6" joiner including knives. I would believe anything around $100 would be a good deal for either unit. I would believe the belt sander should accept Shopsmith repair parts but have not had one in the shop. Try to get the operators manual if possible.rmojo wrote:Hey Bill I have a guy near me that has a Menards belt sander and jointer for sale. I have the shopsmith jointer but was thinking about the sander. Are these units any good and what would be a fair price on them? Thanks!
Bill Mayo bill.mayo@verizon.net
Shopsmith owner since 73. Sell, repair and rebuild Shopsmith, Total Shop & Wood Master headstocks, SPTs, attachments, accessories and parts. US Navy 1955-1975 (FTCS/E-8)
Shopsmith owner since 73. Sell, repair and rebuild Shopsmith, Total Shop & Wood Master headstocks, SPTs, attachments, accessories and parts. US Navy 1955-1975 (FTCS/E-8)
-
"Wild Bad Bob"
- Platinum Member
- Posts: 1065
- Joined: Fri Mar 28, 2014 2:03 pm
- Location: Germantown, Wi
rmojo,
I was in contact with a guy in Elmo, MN about a menards clone 6" belt sander and jointer yesterday, is that the one???? Both for $125.00 He never sent me any pics last night and the Craigs list add is gone.
Bob
I was in contact with a guy in Elmo, MN about a menards clone 6" belt sander and jointer yesterday, is that the one???? Both for $125.00 He never sent me any pics last night and the Craigs list add is gone.
Bob
Measure once, cut as many times as needed to get it right! Bob
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.