A certain someone would kill me if I got another so soon, but it seems low enough I should post it. Please let me know if this is not proper. It just seems cheap enough someone might get it instead of buying a needed spare part or two.
https://sfbay.craigslist.org/sby/tls/4442707386.html:o
Fitzhugh
PS, I'd like to hear from anyone nearby, I'm in Berkeley. I'd love to do a shop visit and learn a little (like how these things are supposed to sound! )... I'll bring pie.
$50 er on cl in Bay area
Moderator: admin
$50 er on cl in Bay area
Greenie (no serial #), 82 Mark V 500 serial #128648, ci bandsaw, old jigsaw, planer. All one buy in March 2014. Magna Jointer added Nov. '14. Speed reducer, conical disk and two bearing quill upgrade.
Looks like a great deal for someone.
PS The emoticon attached itself to the end of the link, breaking it.
This link will work https://sfbay.craigslist.org/sby/tls/4442707386.html
PS The emoticon attached itself to the end of the link, breaking it.
This link will work https://sfbay.craigslist.org/sby/tls/4442707386.html
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
-
"Wild Bad Bob"
- Platinum Member
- Posts: 1065
- Joined: Fri Mar 28, 2014 2:03 pm
- Location: Germantown, Wi
Fritz its only 50.00, it cost me more then twice that just to fill up my car. Thats a dinner in SF. See, if single like me you could just do it!!!!
Measure once, cut as many times as needed to get it right! Bob
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
-
dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
rbursek, you keep making the point that you are an unencumbered single guy. To whom and what message are you trying to communicate?rbursek wrote:Fritz its only 50.00, it cost me more then twice that just to fill up my car. Thats a dinner in SF. See, if single like me you could just do it!!!!
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
-
"Wild Bad Bob"
- Platinum Member
- Posts: 1065
- Joined: Fri Mar 28, 2014 2:03 pm
- Location: Germantown, Wi
That I need not have to answer to anyone. Ask permission, be incombered ect in any way via a relationship. I can be totally selfish to myself. And I feel sorry for those who cant.
Measure once, cut as many times as needed to get it right! Bob
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
Thanks for fixing that. Odd, since I don't use emoticons on forums often/ever. Guess my phone I posted from was interpreting my feelings in addition to mangling what I type!rpd wrote:Looks like a great deal for someone.
PS The emoticon attached itself to the end of the link, breaking it.
I gotta say, my wife is beyond patient. But I just brought home a greenie, an 82, a bs, planer and jigsaw. That filled up the shop I was in the middle of setting up so now it is hard to get to the bathroom (odd house)... And promptly took them apart, cleaning them in the kitchen, electrolysis bath just outside the front door, and then I sit and polish in the living room. Let's see... There is still room on her side of the bedroom!
Yeah, I'd pick it up just to part out if I were a bit closer and single.
Greenie (no serial #), 82 Mark V 500 serial #128648, ci bandsaw, old jigsaw, planer. All one buy in March 2014. Magna Jointer added Nov. '14. Speed reducer, conical disk and two bearing quill upgrade.
You just need to buy it, take it apart, and then stick all the various pieces around the shop, garage etc….divide and conquer 
I have four 10E's right now and my wife would have me committed if she knew, simply because the need would be beyond her comprehension…but when you pile them all up in their various parts, she has no clue what all of it is. The other strategy is to keep things a bit cluttered in the shop - she doesn't do clutter well, so she avoids my shop like the plague, which is how my cave is supposed to be 
I have four 10E's right now and my wife would have me committed if she knew, simply because the need would be beyond her comprehension…but when you pile them all up in their various parts, she has no clue what all of it is. The other strategy is to keep things a bit cluttered in the shop - she doesn't do clutter well, so she avoids my shop like the plague, which is how my cave is supposed to be '78 Mark V 500 #27995 (my Dad bought new)
'82 Mark V 500 #96309
Two '47 10E's (serial#4314+6149) - one a dedicated drill press and the other a lathe
Two 10E/ER in parts slowly being restored…#26822 and #????? (SS plate missing)
SPT's: Bandsaw, Belt Sander, Strip Sander, Jointer, Jigsaw, Biscuit Joiner
'82 Mark V 500 #96309
Two '47 10E's (serial#4314+6149) - one a dedicated drill press and the other a lathe
Two 10E/ER in parts slowly being restored…#26822 and #????? (SS plate missing)
SPT's: Bandsaw, Belt Sander, Strip Sander, Jointer, Jigsaw, Biscuit Joiner
I though the same thing - the seller took the time to explain how the photos are after he piled a bunch of crap on it…would have been less work to just move the crap and then take the photos.joedw00 wrote:It would have been nice if they would have took some of the junk off of it before posting a picture.
'78 Mark V 500 #27995 (my Dad bought new)
'82 Mark V 500 #96309
Two '47 10E's (serial#4314+6149) - one a dedicated drill press and the other a lathe
Two 10E/ER in parts slowly being restored…#26822 and #????? (SS plate missing)
SPT's: Bandsaw, Belt Sander, Strip Sander, Jointer, Jigsaw, Biscuit Joiner
'82 Mark V 500 #96309
Two '47 10E's (serial#4314+6149) - one a dedicated drill press and the other a lathe
Two 10E/ER in parts slowly being restored…#26822 and #????? (SS plate missing)
SPT's: Bandsaw, Belt Sander, Strip Sander, Jointer, Jigsaw, Biscuit Joiner
Sorry, but I was still in the bay area, (Sunnyvale) that would SO be mine!
I think I need to make my baby brother sick, because he and his family were visiting the in-laws last week. They (in-laws) live in Fremont, and he called me from Sunnyvale, while they were visiting. (They even sent me a picture of the Toys-R-Us in Sunnyvale, then I told them it was, and still is, haunted.)(I used to work there.)
steve
I think I need to make my baby brother sick, because he and his family were visiting the in-laws last week. They (in-laws) live in Fremont, and he called me from Sunnyvale, while they were visiting. (They even sent me a picture of the Toys-R-Us in Sunnyvale, then I told them it was, and still is, haunted.)(I used to work there.)
steve