Job I wouldn't want no matter the pay
Moderator: admin
Job I wouldn't want no matter the pay
Here is a little video of a job that is a little to high for me, how about you?
http://edge.liveleak.com/80281E/u/u/ll2 ... tra_params
Ed
http://edge.liveleak.com/80281E/u/u/ll2 ... tra_params
Ed
- "Wild Bad Bob"
- Platinum Member
- Posts: 1065
- Joined: Fri Mar 28, 2014 2:03 pm
- Location: Germantown, Wi
Ah yes, to be young again and dumb and full of ^%$!!!! It is all relative!!! I worked in fossil fuel power plants for 20 years. Some up to 20+ stories, all the "floors" are made of open grating, so when yo step out of the elevator, you can see down through it. Takes awhile to get used to it, take people on a tour, fun to watch them hesitate and/or step back into the elevator when the door opens.
Climbing those towers, the sway would be something to get used to for me.
Climbing those towers, the sway would be something to get used to for me.
Measure once, cut as many times as needed to get it right! Bob
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
- Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
The height does not bother me but all the various transitions would kill me.
I can climb a ladder all day but going from the ladder to the roof is killer and even worst is going from the roof to the ladder.
I thought a few times we would have to get the fire dept out to get me down.
And the roof is only 8-10 feet high. I could hang from the edge and drop and survive and in my younger day I could jump the distance. But now I just like to die instead of trying to get back on the ladder.
I watched the video and it did not bother me until he got to a transition. Each one had me at that edge of my seat going oh no!
I can climb a ladder all day but going from the ladder to the roof is killer and even worst is going from the roof to the ladder.
I thought a few times we would have to get the fire dept out to get me down.
And the roof is only 8-10 feet high. I could hang from the edge and drop and survive and in my younger day I could jump the distance. But now I just like to die instead of trying to get back on the ladder.
I watched the video and it did not bother me until he got to a transition. Each one had me at that edge of my seat going oh no!
Ed in Tampa
Stay out of trouble!
Stay out of trouble!
- "Wild Bad Bob"
- Platinum Member
- Posts: 1065
- Joined: Fri Mar 28, 2014 2:03 pm
- Location: Germantown, Wi
Loss of machoism=wisdom!!!
Ed, I dont know how old you are, but what are you doing on the roof???!!!! Example, one of the retired Green Bay Packers, Max McGee was on his cleaning out leaves, fell and died from ranch style home. Somethings we should not do as we get older!!! My fear too was getting back on the ladder to get down.
http://www.freerepublic.com/focus/f-news/1914208/posts
Ed, I dont know how old you are, but what are you doing on the roof???!!!! Example, one of the retired Green Bay Packers, Max McGee was on his cleaning out leaves, fell and died from ranch style home. Somethings we should not do as we get older!!! My fear too was getting back on the ladder to get down.
http://www.freerepublic.com/focus/f-news/1914208/posts
Measure once, cut as many times as needed to get it right! Bob
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
56/57 Greenie with jointer, 85 Mark V with band saw, 63 Goldie with jointer, 3 ER 10s, 1951 vintage, Hernia from the Er 10s, Tool Shop SS clone 6" jointer, and 6" belt sander, Delta 10" TS, Buffalo 6" jointer, Craftsman 12" BS, 10" Ryobi planer. Compound Miter, and misc.
That didn't bother me a bit watching the video. BUT I'm the one that can't get past about the first landing on a fire tower.
:D:eek:
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
Back in the day.... I was a member of a tower climbing club. In northern WI the state had constructed fire watch towers well above the tree line and in visual sight of each other. At one time they were maned but air planes replaced the need for someone to have that job.
One of my uncles had that tower job for a while, of course it was only a 3 season job and didn't pay well, imagine that! After they "closed" the towers people could still access the tower and climb to the platform just below the locked top building.
So that is what we did. And since there were many of them we would have the opportunity to do so many times. As with all things like this you end up getting bored, finding more interesting at the time things to do and well growing up and not having the time to do them anymore.
They stood there for many years until the state decided it was un-safe and they had to come down.
A couple of summers ago I hiked into one of my favorites, one that my uncle had sat in many years ago. The tower was gone but the concrete that it was mounted on was still in place. The small "fruit cellar" that had been dug into the hill side was still there and it appeared someone had lived in it for a while???? Anyway it was interesting to see the area now, much more grown in and trails unused gone back to forest.
Of course they seem high but then they were the highest things for miles around. Always placed on hills and if I had to guess maybe 140' or so in the air. Nothing at all like the video.
Ed
One of my uncles had that tower job for a while, of course it was only a 3 season job and didn't pay well, imagine that! After they "closed" the towers people could still access the tower and climb to the platform just below the locked top building.
So that is what we did. And since there were many of them we would have the opportunity to do so many times. As with all things like this you end up getting bored, finding more interesting at the time things to do and well growing up and not having the time to do them anymore.
They stood there for many years until the state decided it was un-safe and they had to come down.
A couple of summers ago I hiked into one of my favorites, one that my uncle had sat in many years ago. The tower was gone but the concrete that it was mounted on was still in place. The small "fruit cellar" that had been dug into the hill side was still there and it appeared someone had lived in it for a while???? Anyway it was interesting to see the area now, much more grown in and trails unused gone back to forest.
Of course they seem high but then they were the highest things for miles around. Always placed on hills and if I had to guess maybe 140' or so in the air. Nothing at all like the video.
Ed
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
I have to assume going back down is more challenging like the roof/ladder 'transition'. One MUST look down to descend reliably.
Oh the pull one's self up and over(untethered) has to increase one's pulse rate!!!!
Noticed he was wearing gloves!:D
Oh the pull one's self up and over(untethered) has to increase one's pulse rate!!!!
Noticed he was wearing gloves!:D
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange