Greenie question

Moderator: admin

Post Reply
ddub

Greenie question

Post by ddub »

I have access to purchasing a green mark V.

My goal is to get another unit so that I don't have to change tools as frequently when doing jobs.

I see the green models are 3/4 hp and the gilmer drive.

For powering the belt sander or the band saw (which ever one takes the least amount of power) is there an issue with the 3/4 hp?

How is the Gilmer drive for maintenance/parts availability?

Here is a picture of the unit that I am looking at. The motor was recently gone through but it probably needs a bit of maintenance.

Image
Top
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

3/4 hp is more than enough for a bandsaw or belt sander. Actually it is overkill IMHO.

The Gilmer belts are still available from SS.

The down side to the Gilmer, is that the quill is different. Newer quills will not fit.

They can be converted/upgraded to poly-v, but that is expensive(idler sheave, main shaft, quill are all replaced).

I would not hesitate if the $ is right.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
User avatar
2centsworth
Gold Member
Posts: 268
Joined: Wed Oct 16, 2013 4:35 pm
Location: Georgetown, TX

Now we're talking....

Post by 2centsworth »

Now we are talking. Second unit already way to go. Make it a shorty or even a mini and start looking for your third one :D . Do a search for shorty or mini and have some fun. Yes the 3/4 hp motor will be fine if it is in good working condition. If the belts are good go for it. Check the power chord they get brittle after this long. Easy repair on the cord. You are hooked ! Welcome to the forum these are the people to ask. GO FOR IT !
Jerry Penny
2centsworth
The Woodlands, Tx
SS 520 SN#518424 2000 (reversed motor), Shopsmith 10 E (shorty) fully restored by Skip with DC motor, Shopsmith 10 ER fully restored by Skip with DC motor, Shopsmith 10 ER (under going restoration), Greenie Shorty sanding station, Greenie Mini jointer station, SS Bandsaw power station, SS Planner, SS overhead pin router, SS Belt Sander, SS Strip Sander,, SS Jigsaw, SS Dust Collector, Ringmaster, and still having fun looking for more !
Top
ddub

Post by ddub »

2cents,
Yes I have seen the shorties. They seem to be on ebay continually. I have considered purchasing one there.

While they are cool, space isn't a premium for me. Yes I am fortunate in that area. My "hobby shop" is 30 x 100. LOL
If I need more space, I'll have to pull another snowmobile out. That is my limiting factor, too many snowmobiles. If I follow suit with that many shopsmiths, please commit me in the "hoarder rehabilitation program". :D
Top
ddub

Post by ddub »

Well verbally a deal has been made. It may take me a while to pick it up as it is about 150 miles from me, but it is only about 20 miles out of my way to go see family.

My family is always "amazed" at what I bring by...... LOL
Top
Post Reply

Return to “Community”