scroll saw shaft mark V500

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
bobpjr
Bronze Member
Posts: 1
Joined: Sun Aug 24, 2014 11:59 am

scroll saw shaft mark V500

Post by bobpjr »

the gear on the shaft of my scroll saw does not engage the nearby gears. it looks like perhaps it has slid about 1/2 inch down the shaft. I can find no way to move it back or adjust it. any ideas???
Top
User avatar
joedw00
Platinum Member
Posts: 1957
Joined: Thu Jul 20, 2006 7:01 pm
Location: Wichita, Kansas

Post by joedw00 »

Welcome to the forum. Pictures would up.
Joe

520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500

Being a VETERAN is an honor
Being a GRANDPA is priceless
Top
User avatar
wa2crk
Platinum Member
Posts: 3080
Joined: Sat Jul 22, 2006 7:37 am
Location: Leesburg, Fl

Post by wa2crk »

http://www.shopsmith.net/forums/showthr ... ll+rebuild

Bob.
You may want to try the link for the rebuild thread on this forum. (posted above) We like pictures so if you can post a few it would be a help.
Bill V
Top
Post Reply

Return to “Maintenance and Repair”