Assembly Help

Moderator: admin

Post Reply
littlesteam
Bronze Member
Posts: 1
Joined: Sat Nov 15, 2014 5:34 pm

Assembly Help

Post by littlesteam »

I am in the SF Bay Area and looking for someone to assist me physically in assembling a Mark V system. This is an initial installation.
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

If you bought it from SS, instructions are in the box.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
User avatar
algale
Platinum Member
Posts: 4841
Joined: Thu Nov 04, 2010 8:13 am

Post by algale »

Also, folks here will provide advice if you run into problems.
User avatar
curiousgeorge
Platinum Member
Posts: 880
Joined: Tue Feb 27, 2007 1:00 am
Location: Fort Worth, Texas

Post by curiousgeorge »

littlesteam wrote:I am in the SF Bay Area and looking for someone to assist me physically in assembling a Mark V system. This is an initial installation.
I may be wrong, but he used the word physically. So maybe he needs a hand lifting as well as assembling...???
George
Ft. Worth, TX.
Go TCU Froggies
User avatar
dgale
Platinum Member
Posts: 1007
Joined: Fri Jul 13, 2012 1:17 am
Location: Dows Prairie, CA

Post by dgale »

curiousgeorge wrote:I may be wrong, but he used the word physically. So maybe he needs a hand lifting as well as assembling...???
That was how I interpreted it….I'd be happy to help if I didn't live six hours to the north.
'78 Mark V 500 #27995 (my Dad bought new)
'82 Mark V 500 #96309
Two '47 10E's (serial#4314+6149) - one a dedicated drill press and the other a lathe
Two 10E/ER in parts slowly being restored…#26822 and #????? (SS plate missing)
SPT's: Bandsaw, Belt Sander, Strip Sander, Jointer, Jigsaw, Biscuit Joiner
Post Reply