Has anyone gotten one, are they great? Or, just passable.
I'm tempted, especially at $164.00 Tax return cash
is RAPIDLY burning a hole in my pocket.
This one from Home.
http://www.shopsmith.com/ownersite/spec ... 09277&epn=
It doesn't say but does anyone know why this WON'T work on a
Model 10? (I've seen TONS of SS stuff, that they say won't work,
but, guess what? Works on mine!)
steve
The Nova G3 chucks on sale?
Moderator: admin
The Nova G3 chucks on sale?
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
-
rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: The Nova G3 chucks on sale?
If I hadn't just bought the conical disk and sharpener, I would buy one in a min .... Damn!
I got the email this afternoon.
I think it should work well on a 10 ...
But what do I know!
I got the email this afternoon.
I think it should work well on a 10 ...
But what do I know!
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
-
BuckeyeDennis
- Platinum Member
- Posts: 3812
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: The Nova G3 chucks on sale?
All the reviews I've read indicate that the G3 is a top-notch chuck. I'll probably pull the trigger on the sale deal this time, myself. Based on the cheapest price I could find anywhere online for the chuck and adapter, Shopsmith is throwing in the pin jaws for about $25. I honestly don't know if I need them or not, but they get very good reviews at $50, so what the heck.
Steve, I can't imagine how the chuck would not fit on a 10ER. All of my chucks and arbors mate up perfectly with any of my 10E, 10ER, Power Station, or Mark V spindles.
I do have two Mark V accessories that would require some work to mate up with a 10ER. A speed reducer (because it mounts to the quill and way tubes as well as the spindle), and a Ring Master (which mounts to the way tubes).
Steve, I can't imagine how the chuck would not fit on a 10ER. All of my chucks and arbors mate up perfectly with any of my 10E, 10ER, Power Station, or Mark V spindles.
I do have two Mark V accessories that would require some work to mate up with a 10ER. A speed reducer (because it mounts to the quill and way tubes as well as the spindle), and a Ring Master (which mounts to the way tubes).
Re: The Nova G3 chucks on sale?
Thanks guys. I'll pull the pin!
Dennis, Dick, I agree with you guys.
I've yet to see ANYTHING that just mounts
on the spindle, that doesn't work on the
Model 10. (As well as a few things that
mount on the 500 table, too. The 500
shaper/jointer fence is one.)
steve
Dennis, Dick, I agree with you guys.
I've yet to see ANYTHING that just mounts
on the spindle, that doesn't work on the
Model 10. (As well as a few things that
mount on the 500 table, too. The 500
shaper/jointer fence is one.)
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Re: The Nova G3 chucks on sale?
Steve,
If you plan to turn pens, A set of pen jaws used to help hold the blank while drilling the hole is available I have them and really like them). A general price is $44, however Rockler (or maybe Woodcrafter) has recently had them on sale for $30.
Be well,
Ben
If you plan to turn pens, A set of pen jaws used to help hold the blank while drilling the hole is available I have them and really like them). A general price is $44, however Rockler (or maybe Woodcrafter) has recently had them on sale for $30.
Be well,
Ben
Re: The Nova G3 chucks on sale?
I have the G3 and absolutely love it! I haved used it making bowls and Christmas ornaments with very good results.
Neal
Mark V 500, Mark V 500 Power Pro, SS mounted Planer, Jointer, Bandsaw, Belt Sander, Jig Saw, Nova G3, Universal Tool Rest
Mark V 500, Mark V 500 Power Pro, SS mounted Planer, Jointer, Bandsaw, Belt Sander, Jig Saw, Nova G3, Universal Tool Rest
-
ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: The Nova G3 chucks on sale?
I have one that I use on my Powermatic and can say for sure that it is a good chuck. I consider my Oneway a great chuck. That being said, if you need a chuck, this one won't let you down. The pen jaws, by the way, are great... Order them!,,
-
BuckeyeDennis
- Platinum Member
- Posts: 3812
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: The Nova G3 chucks on sale?
Chris, you sound like just the guy to clarify a burning question. Shopsmith is bundling "pin" jaws with the G3 chuck. One can also purchase "pen" jaws, which would logically be intended for pen turning. Can you shed any light on the difference, if any?ChrisNeilan wrote:I have one that I use on my Powermatic and can say for sure that it is a good chuck. I consider my Oneway a great chuck. That being said, if you need a chuck, this one won't let you down. The pen jaws, by the way, are great... Order them!,,
Re: The Nova G3 chucks on sale?
If you go to 153580 you can see the mini report with pictures.BuckeyeDennis wrote:Chris, you sound like just the guy to clarify a burning question. Shopsmith is bundling "pin" jaws with the G3 chuck. One can also purchase "pen" jaws, which would logically be intended for pen turning. Can you shed any light on the difference, if any?ChrisNeilan wrote:I have one that I use on my Powermatic and can say for sure that it is a good chuck. I consider my Oneway a great chuck. That being said, if you need a chuck, this one won't let you down. The pen jaws, by the way, are great... Order them!,,
Ps. No clue how to link to that thread
especially using this iPad thingy!Be well,
Ben
-
ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: The Nova G3 chucks on sale?
The pin jaws are simply small jaws whereas the pen jaws are designed to hold pen blanks for the purpose of drilling. I love the pen jaws, but to be honest, if I need to hold small objects (ornamental birdhouses for example) I prefer my oneway talon chuck with spigot jaws. For pens, however, the pen jaws are the best thing since sliced bread. Much better than a drill press and clamp... Fyi, you still need to put the pen blanks on a mandrel to turn, the pen jaws are more to hold the blank while drilling...