jointer blades

scottyrg · Post by **scottyrg** » Mon Mar 09, 2015 10:05 pm

Can anybody tell me what size jointer knives I need for total shop 6" jointer?

beeg · Post by **beeg** » Mon Mar 09, 2015 11:56 pm

Try here.

http://www.americannationalknife.com/2To7.asp

Contractor · Post by **Contractor** » Tue Mar 10, 2015 6:53 am

I have to say that for the last few of hours i have been hooked by the impressive articles on this blog. Keep up the good work. post, thanks for your help in advance

scottyrg · Post by **scottyrg** » Tue Mar 10, 2015 2:01 pm

Thanks for the reply but the total shop isn't listed. I need to know the deminsions of the knives to find a set that will work. I bought the machine with no blades in it and don't know what size goes in it.

reible · Post by **reible** » Tue Mar 10, 2015 3:54 pm

A quick search here brought up this posting:

http://www.shopsmith.com/ss_forum/viewt ... +6+jointer

If you read down a couple of posts to the one from Bill Mayo. At that time he had a set of blades, no idea if that offer still stands...

Ed

billmayo · Post by **billmayo** » Tue Mar 10, 2015 10:27 pm

I have 2 sets of 3 6" joiner blades left over from Total Shop joiners. One set is 093" (2.88mm) wide and .553" (14.9 mm) high and the other set is .125" (3.12mm) wide and .619" (15.75mm) high. Both sets are the same thickness from top to bottom and have been sharpen.

scottyrg · Post by **scottyrg** » Wed Mar 11, 2015 12:34 am

How much you want for them and how to purchase them bill.

Shopsmith Forums

jointer blades

jointer blades

Re: jointer blades

General Contractor

Re: jointer blades

Re: jointer blades

Re: jointer blades

Re: jointer blades