"Recently the blade moves to the left and contacts the edge of the insert."algale wrote:Check the arbor and set screw.
Blade would move to the left, Algale, unless you Mark series guys have some newfangled
difference I don't know about.
steve
Creepy Experience
Moderator: admin
Re: Creepy Experience
Blade would move to the left, Algale, unless you Mark series guys have some newfangled
difference I don't know about.
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Creepy Experience
skou wrote:JPG, ID-10-t. The 4th letter should be a "O" not a
zero. "0."
It's pronounced "ID-ten-t," and used in the phrase,
"Id-ten-t error over there, without the ID10T being
aware he is being mocked.
The phrase is in conjunction with the acronym,
PEBKAC. (Problem exists between chair and keyboard.)
Yes, I am funning!
steve
Ahhh so! Well I may as well 'retire' for the night, as I have now learned my 'new thing' fer today!
Sure it is not Between Keyboard And Chair? Also that path does not include passing through the uppermost extremity!
TBN, I think the table moves to the right!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Creepy Experience
Palm meet forehead. Missed the fact that blade is moving left. Not likely an arbor issue.skou wrote:"Recently the blade moves to the left and contacts the edge of the insert."algale wrote:Check the arbor and set screw.
Blade would move to the left, Algale, unless you Mark series guys have some newfangled
difference I don't know about.
steve
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Creepy Experience
Man, it is GOOD to bust some MARK guys' posteriors!
JPG, YOU don't count, because YOU have strayed to
the dark (cast iron) side.
(Yes, STILL funning!)
steve
JPG, YOU don't count, because YOU have strayed to
the dark (cast iron) side.
(Yes, STILL funning!)
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Re: Creepy Experience
Db5, if you find the cause, I (if not "we") would bedb5 wrote:I searched and found nothing.
Recently the blade moves to the left and contacts the edge of the insert. I've just marked the tubes on both sides of the carriage and on both sides of the table to see if the creep is from the motor or the table but don't have any data as yet. Any suggestions?
DELIGHTED to know the reason.
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Re: Creepy Experience
Well, as your mama said when she was changing your diapers, "I'll get to the bottom of this mess." When I do I'll let you know. I was hoping for some recommendations. Instead some of you are "funnin" 
me but no one is "storying" me(only southerns and some border states understand storying - it's a euphemistic for Hilliary's latest explanation on her peccadilloes as Sec. State. Storying is another word for blatantly lying. [is there an icon for liars - perhaps Hilary's]
Now for you, JPG, I will post all the Rorschach Cards and you can tell me what you see. I no longer have my Rorschach manual so I won't know just how crazy or sane you are. In graduate school the instructor for Rorschach berated me for finding strengths in someone I tested who was "crazy as a bed bug" (his words) and told me that the purpose was only to find out deficits not to find out her strengths. He and I did not get along. Dr. Malone is now deceased, God bless his heart (another southern term) as will everyone but. . .
me but no one is "storying" me(only southerns and some border states understand storying - it's a euphemistic for Hilliary's latest explanation on her peccadilloes as Sec. State. Storying is another word for blatantly lying. [is there an icon for liars - perhaps Hilary's]Now for you, JPG, I will post all the Rorschach Cards and you can tell me what you see. I no longer have my Rorschach manual so I won't know just how crazy or sane you are. In graduate school the instructor for Rorschach berated me for finding strengths in someone I tested who was "crazy as a bed bug" (his words) and told me that the purpose was only to find out deficits not to find out her strengths. He and I did not get along. Dr. Malone is now deceased, God bless his heart (another southern term) as will everyone but. . .