The cabinet was fitted with LED 12 volt light strips. This picture shows the rabbet that was cut in the back of each cubby shelf to recess the strip.
- IMG_20141215_163225_898 (Mobile).jpg (35.79 KiB) Viewed 3688 times
I also ran a strip vertically behind the cognac bottle compartment to back light the bottle. All of the engraved shot glass will be back lighted.
- IMG_20150331_162746_354 (Mobile).jpg (93.21 KiB) Viewed 3688 times
- IMG_20150331_162709_546 (Mobile).jpg (88.9 KiB) Viewed 3688 times
All of the wire and transformer are stored behind the crown molding. You can also see the French cleat that will mount the cabinet to the wall. Additionally there will be a corbel at the base to help support the weight of the cabinet.
- IMG_20150408_141648_607 (Mobile).jpg (70.74 KiB) Viewed 3688 times
- IMG_20150324_133746_311 (Mobile).jpg (85.6 KiB) Viewed 3688 times
110v plug comes down the back and out the bottom.
- IMG_20150324_133158_232 (Mobile).jpg (53.76 KiB) Viewed 3688 times
I mounted the right door with the ANG, North Dakota, and 178th Fighter Squadron patches cut in red oak. I have a good friend, also a retired member of the 119th who is a scroll saw artist. Much thanks to Col Joan for her work.
- IMG_20150408_141722_711 (Mobile).jpg (66.2 KiB) Viewed 3688 times
On the left side two plaques will be mounted, also in red oak. They are being lazer cut. They will tell about the Unit's WSO history. I am waiting for their return.
On the inside of the door I framed a poem entitled "I Flew".
- IMG_20150408_142135_980 (Mobile).jpg (74.95 KiB) Viewed 3688 times
I finished the cabinet by first applying a paste wood filler. I then French polished it with orange shellack. I rubbed it down to a medium sheen.
That's my winter project that has kept me away from the Forum. It's been much fun.
desktop size, Avid 5x10 Pro CNC w/ATC, CNCed G0704 milling machine
