Herringbone Pen

joedw00 · Post by **joedw00** » Sun Jun 07, 2015 11:56 pm

A good video on making Herringbone Pen

[youtube]https://www.youtube.com/watch?v=ixDgzvVroqw[/youtube]

charlese · Post by **charlese** » Mon Jun 08, 2015 1:02 pm

Yes, Joe! Real good video! Especially the first half about making and assembling the pieces. Excellent use of a disk sander jig.

Thanks for posting!

benush26 · Post by **benush26** » Mon Jun 08, 2015 1:25 pm

Lots of fine detail work but worth the effort for the finished product! I am guessing that I would make more than a couple assembly errors along the way

, but may give it a try later this summer.

Thanks for posting

Be well,
Ben

reible · Post by **reible** » Tue Jun 09, 2015 1:14 am

That looks like way to much work for me. Yes the results are nice, but all the cutting, sanding, gluing, gluing, gluing.....

I really did like the disk sander tool. I might make one of those for other purposes.

It is nice when someone shares a talent they have and you can get a feel for the efforts needed to turn that sort of pen. And thanks for sharing it here so we can appreciate it too.

Ed

dgreen810 · Post by **dgreen810** » Thu Jun 18, 2015 10:22 am

I decided to try my hand at this. Wood is Walnut, Pecan, and Bubinga. Had to make a couple of jigs.

Very tedious, will probably ruin the whole "Ka-bob" when trying to turn it.

Have never tried my hand at making a pen.

Don G

joedw00 · Post by **joedw00** » Thu Jun 18, 2015 11:01 am

Looks like you have a good start. I have not tried it yet.

Shopsmith Forums

Herringbone Pen

Herringbone Pen

Re: Herringbone Pen

Re: Herringbone Pen

Re: Herringbone Pen

Re: Herringbone Pen

Re: Herringbone Pen