A while back in the shop (drilled glass platter)

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderator: admin

Post Reply
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

A while back in the shop (drilled glass platter)

Post by reible »

The place we have in the UP of MI (soon to no longer be ours). Had a hanging lamp over the dinning room table that lost is glass shade before I ever knew it. It is an old pull down lamp with three bulbs and a cloth cord. Perhaps from the 1920 or maybe even earlier, so modern stuff just did not fit.

One day shopping at a thrift store I came across this clear glass platter that looked to be about the right size so I spent the $1 on it and sure enough it was just about what I was looking for.

I already owned a glass drill bit so I drilled it and took it up there and the fit was pretty good. Since I have no idea what the original looked like this might be close or totally off the wall but it works for me.

I forgot to take pictures until my last trip and then it was already dark so I shot with the light on and planned to take some more shots the next morning before I left. Forgot to do that but here is what I do have.
IMG_8652sc.jpg
IMG_8652sc.jpg (48.04 KiB) Viewed 2459 times
IMG_8653sc.jpg
IMG_8653sc.jpg (60.44 KiB) Viewed 2459 times
IMG_8657sc.jpg
IMG_8657sc.jpg (59.45 KiB) Viewed 2459 times
It was a fun project and well worth the expense and effort. I hope it gives someone another idea of what can be done if you think just a little out of the box.

Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: A while back in the shop (drilled glass platter)

Post by JPG »

Add a paper doily. :D Obscures the sockets etc.. ;)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Re: A while back in the shop (drilled glass platter)

Post by Ed in Tampa »

Pull down lights with cloth cord were very popular in the 50's. We had one in our dinning room that my Mother loved. But it went out of style and she replaced it in the 60's
User avatar
Bruce
Platinum Member
Posts: 884
Joined: Sun Aug 27, 2006 10:31 pm
Location: Central MO

Re: A while back in the shop (drilled glass platter)

Post by Bruce »

That's the second time dining room has been spelled 'dinning'. Is that a regional spelling? Just curious.
moose
Gold Member
Posts: 209
Joined: Tue Mar 24, 2009 10:25 am

Re: A while back in the shop (drilled glass platter)

Post by moose »

Spelling and everything proper is optional here
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Re: A while back in the shop (drilled glass platter)

Post by reible »

I'm the worst speller so it has more to do with the spell checker not correcting me the anything. I'm not sure I ever passed a spelling test in my life.

Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Re: A while back in the shop (drilled glass platter)

Post by Ed in Tampa »

I just checked my spell checker goes with either spelling.
That is because both are valid words. Dining as in eating food.
Dinning as in loud confusing noise.

I'm a lousy speller so my mistake was ignorance on my part.
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Re: A while back in the shop (drilled glass platter)

Post by dusty »

I rely heavily on the spell checker and I NEVER even think about calling out someone for their spelling or grammar errors. :eek:
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
berry
Platinum Member
Posts: 751
Joined: Sun Oct 15, 2006 5:46 pm
Location: St. Paul, MN

Re: A while back in the shop (drilled glass platter)

Post by berry »

Looks like a good fit and super photography.
Post Reply