- FB_IMG_1442002459849.jpg (75.07 KiB) Viewed 2262 times
Need Prayer Requests
Moderator: admin
Re: Need Prayer Requests
Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
Re: Need Prayer Requests
Bill, you and your wife both are getting my prayers and those of my family. You not only are a huge wealth of information for us all, you have been a true gentleman the few times we spoke on the phone, spending lots of time answering my ill informed questions and chatting about life. Bless you, and get well.
-
- Gold Member
- Posts: 159
- Joined: Sun Nov 09, 2008 2:06 am
Re: Need Prayer Requests
My Prayers are with you Bill.
Re: Need Prayer Requests
Bill, my prayers are with you and you are certainly in all our thoughts. You have touched so many folks over the years and we all pray for your health as seen in the posted responses seen here. Never met you but feel like I know you, God bless and watch over you through this time of need.
Kip
Kip
Re: Need Prayer Requests
Couldn't have said it better, except;joedw00 wrote:
Being a VETERAN is an honor
Being a GRANDPA is priceless
I'm not a grandpa, but I AM a Veteran.
Joe, thank you.
Bill, THANK YOU, for ALL you do here!
Your help is one of my treasures, coming here.
I've rarely met someone more willing to help
another person out, as much as you.
I'd be honored for someone to say, "You're
half as good as Bill Mayo!"
Yes, I am, and will be! (Praying!)
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
- everettdavis
- Platinum Member
- Posts: 2163
- Joined: Thu Jul 17, 2014 11:49 am
- Location: Lubbock, TX
Re: Need Prayer Requests
Has anyone heard from Bill since he went in to the hospital? I have tried to contact him, but have been unable to connect and find out how he is doing.
I know many here are praying for Bill.
Everett
I know many here are praying for Bill.
Everett
Re: Need Prayer Requests
Thanks for all the prayers. They do help me get through each day. I finally got a report on my heart problems on Friday. I have 3 blocked arteries, one at 100%, one at 90% and one at 70% so the doctor did not install any stents as I will need quadruple bypass heart surgery. I had 5 tests done for the heart surgery Fridays at the hospital. We should get a schedule for the surgery today. The doctor has done this procedure on several of our friend parents with good results and his reviews are good. The hospital has a large heart department. I will need a lot more prayers now and will let you know what day will be the surgery. The doctor was amazed that I had not had a heart attack or had any problems other than being tired all the time to where I could only spent a max of 30 minutes each time in my shop. I am on a “do not do anything” now.
Bill
Bill
Re: Need Prayer Requests
Bill, we are all pulling and praying for you. Get well and back in the shop.
You give so much to the community, let us know if there is anything we can give back to make things easier for you and your wife. Just looking at this thread shows others feel the same.
Thank you for updating us!
Fitzugh
You give so much to the community, let us know if there is anything we can give back to make things easier for you and your wife. Just looking at this thread shows others feel the same.
Thank you for updating us!
Fitzugh
- Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
Re: Need Prayer Requests
Bill you are In our prayers! Keep us informed. We all are pulling for you.
Last edited by Ed in Tampa on Mon Sep 21, 2015 8:08 pm, edited 1 time in total.
- JPG
- Platinum Member
- Posts: 35457
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Need Prayer Requests
Let us hope that surgery is successful and that perhaps it will 'correct' some other problems you have been experiencing a bit closer to the 'top'. 

╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange