Local repair shops in Pittsburgh

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

ExtraMile
Gold Member
Posts: 420
Joined: Wed Mar 11, 2015 1:44 am

Re: Local repair shops in Pittsburgh

Post by ExtraMile »

BigSky wrote:It seems to me that you received a very reasonable quote from Jacob.
Everything is relative. Relative to, how much money comes into each household. Well let me just say this... no money has come into this home, since, Feb 2014.

So, your reasonable offer, is not reasonable to me. The 'only' thing that my head stock truly needs is, the spring housing assembly replaced. And 'maybe' the sleeve bearing. Everything else, is either newer than 1978 or I have already replaced it. My belts, are good, my on/off switch works perfectly, my motor runs like a champ, my quill has been updated, by previous owner, to a double bearing quill and this unit, has not seen use, in 10+ years. Plus, this Mark V was kept in an inside room of a basement, with a dehumidifier running constantly.

This house, was so clean I swear you could eat off the floors and WOW was it RETRO... 1950's style and colors. His son, still lives there and he just loves Retro.
I am a true blue Xylophiliac, who also is a Nemophiliac ;)
ExtraMile
Gold Member
Posts: 420
Joined: Wed Mar 11, 2015 1:44 am

Re: Local repair shops in Pittsburgh

Post by ExtraMile »

JPG wrote:Can you get the quill feed assembly removed from the headstock?

If so, send it to me and I will 'fix' it and return it to you.

If it is the quill return spring all those washers and wingnuts etc. can stay with you. Only the shaft, spring housing and spring need travel.

Tie a string on the 'switch side' shaft so as to capture the domed washer as the shaft is removed so that total teardown will not be required later. ;)

Be careful to not lose the sleeve and woodruf key.
I will try and accomplish this tear down, in a couple days or maybe over the weekend. If I can, I will get back to you.

This is so nice of you, I sure do appreciate it!
I am a true blue Xylophiliac, who also is a Nemophiliac ;)
ExtraMile
Gold Member
Posts: 420
Joined: Wed Mar 11, 2015 1:44 am

Re: Local repair shops in Pittsburgh

Post by ExtraMile »

I just learned, that I might need rotator cuff surgery. If so, then everything will be put to bed in my shop, for 3 to how ever many months, for rehabilitation... Sad, very sad!!!
I am a true blue Xylophiliac, who also is a Nemophiliac ;)
ExtraMile
Gold Member
Posts: 420
Joined: Wed Mar 11, 2015 1:44 am

Re: Local repair shops in Pittsburgh

Post by ExtraMile »

UPDATE: I had an MRI done on my right shoulder today and in case anyone ever tells you, that an MRI is a breeze, just tell them to SHUT IT!

Here was what I experienced: Oh just so you understand, to stay completely motionless for 45 long minutes, while laying flat on your back, with dagger stabbing you, into your flesh, if that is easy... sorry, NOT SO. Oh how happy I was, when they came in and said 'ok, you are done' My shoulder was aching like a !@#$
I am a true blue Xylophiliac, who also is a Nemophiliac ;)
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Local repair shops in Pittsburgh

Post by JPG »

ExtraMile wrote:UPDATE: I had an MRI done on my right shoulder today and in case anyone ever tells you, that an MRI is a breeze, just tell them to SHUT IT!

Here was what I experienced: Oh just so you understand, to stay completely motionless for 45 long minutes, while laying flat on your back, with dagger stabbing you, into your flesh, if that is easy... sorry, NOT SO. Oh how happy I was, when they came in and said 'ok, you are done' My shoulder was aching like a !@#$
Everyone who is claustrophobic should go through that! :eek:

Enjoy the 'musi - noise'? ;)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
ExtraMile
Gold Member
Posts: 420
Joined: Wed Mar 11, 2015 1:44 am

Re: Local repair shops in Pittsburgh

Post by ExtraMile »

JPG wrote:
Everyone who is claustrophobic should go through that! :eek:

Enjoy the 'musi - noise'? ;)
It was not the claustrophopic issues, it was the fact, that the table was like laying on granite!
I am a true blue Xylophiliac, who also is a Nemophiliac ;)
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Re: Local repair shops in Pittsburgh

Post by reible »

Been there and had that done and got pictures to prove it.

Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
ddub

Re: Local repair shops in Pittsburgh

Post by ddub »

EM,
been there. I needed a brain scan. So the head had to be held still for 45 minutes.

So we get there for the appointment. They have two MRI machines. One larger, one smaller. They go to put me in the smaller machine because the larger one is in use. My head is in a cage. They go to slide me in, and I don't fit. My shoulders hit the side and derailed their bed slide. But in that 60 seconds, I am like, this isn't happening. LOL Yes I will say that I am claustrophobic now.

So they rescheduled for a different MRI machine. And they gave me a sedative. The only way that was going to happen.....

And they found out? Nothing on what was giving me issues, but they did find out that I have stuff happening in my head backwards..... Seriously. So at least I have a medical reason! LOL
User avatar
rjent
Platinum Member
Posts: 2121
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Re: Local repair shops in Pittsburgh

Post by rjent »

ddub wrote:EM,
been there. I needed a brain scan. So the head had to be held still for 45 minutes.

So we get there for the appointment. They have two MRI machines. One larger, one smaller. They go to put me in the smaller machine because the larger one is in use. My head is in a cage. They go to slide me in, and I don't fit. My shoulders hit the side and derailed their bed slide. But in that 60 seconds, I am like, this isn't happening. LOL Yes I will say that I am claustrophobic now.

So they rescheduled for a different MRI machine. And they gave me a sedative. The only way that was going to happen.....

And they found out? Nothing on what was giving me issues, but they did find out that I have stuff happening in my head backwards..... Seriously. So at least I have a medical reason! LOL
You have GOT to explain that ..... :eek: LOL
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Local repair shops in Pittsburgh

Post by JPG »

rjent wrote:
ddub wrote:EM,
been there. I needed a brain scan. So the head had to be held still for 45 minutes.

So we get there for the appointment. They have two MRI machines. One larger, one smaller. They go to put me in the smaller machine because the larger one is in use. My head is in a cage. They go to slide me in, and I don't fit. My shoulders hit the side and derailed their bed slide. But in that 60 seconds, I am like, this isn't happening. LOL Yes I will say that I am claustrophobic now.

So they rescheduled for a different MRI machine. And they gave me a sedative. The only way that was going to happen.....

And they found out? Nothing on what was giving me issues, but they did find out that I have stuff happening in my head backwards..... Seriously. So at least I have a medical reason! LOL
You have GOT to explain that ..... :eek: LOL

Maybe they put him in feet first. :rolleyes:





Orrrrr Maybe he is 'left handed'. :D :cool:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply