- Infrared Heater.jpg (139.99 KiB) Viewed 4280 times
How do you heat your shop?
Moderator: admin
Re: How do you heat your shop?
I use one of these, I leave it set on 55° then turn it up when I am in the shop. Did not notice too much increase in elec bill last winter.
Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
-
rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: How do you heat your shop?
That is exactly what I am using now. Looks just like it.joedw00 wrote:I use one of these, I leave it set on 55° then turn it up when I am in the shop. Did not notice too much increase in elec bill last winter.
How much area are you heating?
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: How do you heat your shop?
John, that must be one heck of a heater or you my the real pure no odor kerosene? Not regular heating stuff. After seeing pics of your shop I would have thought you had a better system to go with all the rest of a A1 shop, but as most of us, only so much bling to go around.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: How do you heat your shop?
Well it is just a 15 year old Sears blow torch burning kerosene from the gas station about 5 miles down the road. There is nothing special about it.ERLover wrote:John, that must be one heck of a heater or you my the real pure no odor kerosene? Not regular heating stuff. After seeing pics of your shop I would have thought you had a better system to go with all the rest of a A1 shop, but as most of us, only so much bling to go around.
Since I never planed to heat 24/7 that is why the electric base board heaters in the bath room and the finishing room. As I said I have the heater to permanently install but because the blow torch works there has been no incentive to install the other one. I do think about it every time I have to go and get 5 Gal of kerosene.
It is not about the money it is about me being lazy and a system that works. You have sparked my interest so maybe it will get done soon.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: How do you heat your shop?
When I lived in Oklahoma, (and had Model 10, #1) I had a real antique
wood-burning kitchen stove in the shop. LOVED that thing! 4 "burner"
stove, with a small-ish oven. Burned wood scraps, or cut-up pallets.
I would also cook on it, just for fun.
Here in Arizona, well, no house heater today, and I'm wearing cut-off
shorts. Although, I WAS able to do some work in the shop today. No
air conditioner out there.
steve
wood-burning kitchen stove in the shop. LOVED that thing! 4 "burner"
stove, with a small-ish oven. Burned wood scraps, or cut-up pallets.
I would also cook on it, just for fun.
Here in Arizona, well, no house heater today, and I'm wearing cut-off
shorts. Although, I WAS able to do some work in the shop today. No
air conditioner out there.
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
-
rcplaneguy
- Platinum Member
- Posts: 549
- Joined: Mon Sep 23, 2013 6:33 pm
- Location: Chapel Hill, NC
Re: How do you heat your shop?
28'x24' detached garage/shop with 16' ceiling. Have a two ton Mitsubishi mini split heat pump for heating and cooling. Nice thing is that I can control the system via my phone or computer from anywhere using a Honeywell redlink internet gateway.
https://www.amazon.com/dp/B006BD1K4A/re ... uwb7K8XQKJ
https://www.amazon.com/dp/B006BD1K4A/re ... uwb7K8XQKJ
Re: How do you heat your shop?
When I first started woodworking I used my grandfather's large 30" x 30' garage with 20'+ ceilings and ran a corn stove and a wood stove at the same time to keep the -10 to +10 degrees F outside to a nice cozy 40 degrees inside.
Now I am in my 3rd stall of a 3-stall garage with the Shopsmith and have a small electric $20 heater I run for about an hour before I go out to take the chill off. I have been trying to get a nice 220v garage heater but alas the $$$ and the wife doesn't allow it. Since it's attached to the house it stays at around 40 degrees almost all winter which is workable in a t-shirt for a few hours, just need my stocking cap on and the small heater to warm up my hands every now and then.
**Minnesota by the way**
Now I am in my 3rd stall of a 3-stall garage with the Shopsmith and have a small electric $20 heater I run for about an hour before I go out to take the chill off. I have been trying to get a nice 220v garage heater but alas the $$$ and the wife doesn't allow it. Since it's attached to the house it stays at around 40 degrees almost all winter which is workable in a t-shirt for a few hours, just need my stocking cap on and the small heater to warm up my hands every now and then.
**Minnesota by the way**
-Beave
Re: How do you heat your shop?
14X24rjent wrote:That is exactly what I am using now. Looks just like it.joedw00 wrote:I use one of these, I leave it set on 55° then turn it up when I am in the shop. Did not notice too much increase in elec bill last winter.
How much area are you heating?
Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
Re: How do you heat your shop?
Dick,
Checkout ProComm flameless propane/NG heaters.
My shop is 26X34 with a 10' ceiling. Detached and well insulated. Our water pressure pump and bladder tank are located in the shop. We definitely need the place to be above freezing.
I use a 5 plaque model like the one I linked to and leave it set at 1 for most of the winter. Keeps the shop at 40 during the coldest days. Turn it up to 2 when I'm in the shop.
http://www.northerntool.com/shop/tools/ ... oCcFXw_wcB
Checkout ProComm flameless propane/NG heaters.
My shop is 26X34 with a 10' ceiling. Detached and well insulated. Our water pressure pump and bladder tank are located in the shop. We definitely need the place to be above freezing.
I use a 5 plaque model like the one I linked to and leave it set at 1 for most of the winter. Keeps the shop at 40 during the coldest days. Turn it up to 2 when I'm in the shop.
http://www.northerntool.com/shop/tools/ ... oCcFXw_wcB
-
richardrouse
- Gold Member
- Posts: 220
- Joined: Tue Jul 21, 2015 7:16 pm
- Location: Haines City FLorida
Re: How do you heat your shop?
In Florida, we just use the sun XD