Hi Everyone
I purchased my first Shopsmith 510 along with a pile of parts, some Shopsmith and some... idk. Anyhow, in the pile of parts was/is tow saw guards that i am hoping someone can identify. I will attempt to attach them.
Thanks and happy new year!!
Bill
HI Everyone. New hear. First Shopsmith. First question.
Moderator: admin
-
MrWilliams
- Silver Member
- Posts: 15
- Joined: Mon Jan 11, 2016 9:14 am
HI Everyone. New hear. First Shopsmith. First question.
Bill CT Mark V (510)
-
MrWilliams
- Silver Member
- Posts: 15
- Joined: Mon Jan 11, 2016 9:14 am
Re: HI Everyone. New hear. First Shopsmith. First question.
/Users/Dad/Desktop/IMG_0273.jpg
Bill CT Mark V (510)
-
MrWilliams
- Silver Member
- Posts: 15
- Joined: Mon Jan 11, 2016 9:14 am
Re: HI Everyone. New hear. First Shopsmith. First question.
sorry - trying to figure out how to add a picture
Bill CT Mark V (510)
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: HI Everyone. New hear. First Shopsmith. First question.
Mean while welcome!!!! Lots of good people here tech wise. A word of caution though, there is a spelling and abbreviation police here to. 
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
JPG
- Platinum Member
- Posts: 35598
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: HI Everyone. New hear. First Shopsmith. First question.
Welcome to the fun - forum.
Is it possible it started life as a '500' and was upgraded to a '510'? You may have other 'duplications'.
Adding pix is not intuitively obvious. Attach, Browse, select, upload, (insert). After clicking on Attach look below for the browse etc.
Is it possible it started life as a '500' and was upgraded to a '510'? You may have other 'duplications'.
Adding pix is not intuitively obvious. Attach, Browse, select, upload, (insert). After clicking on Attach look below for the browse etc.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
MrWilliams
- Silver Member
- Posts: 15
- Joined: Mon Jan 11, 2016 9:14 am
Re: HI Everyone. New hear. First Shopsmith. First question.
- IMG_0273.jpg (70.41 KiB) Viewed 1583 times
Bill CT Mark V (510)
Re: HI Everyone. New hear. First Shopsmith. First question.
Neither of those upper saw guards will work with the 510. These are likely left-overs from one or more upgrades.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: HI Everyone. New hear. First Shopsmith. First question.
Your upper saw guard should look like this:
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: HI Everyone. New hear. First Shopsmith. First question.
Mr W, I am not one of the experts here, but a pic of the head stock/drive assembly, and of the SS tag with the model and SS# on the left side of the head stock when facing the switch/speed dial will answer allot.
Oh by the way, dont turn the speed dial unless running or turning the drive by hand. Newbie mistake.
Oh by the way, dont turn the speed dial unless running or turning the drive by hand. Newbie mistake.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: HI Everyone. New hear. First Shopsmith. First question.
Welcome to the forum Bill!
Mike
Mike