In the next couple months getting home, next week for 5 days, then in April for 5, and the whole month of May from Mom.
I have 2 ERs ready to assemble, Tubes are are cleaned up, but thinking of using this to clean up the inside diameters on the Head stock tail stock, ect.
http://www.mcmaster.com/#cylinder-hones/=11ew720
What ya think??
Moderator: admin
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
What ya think??
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: What ya think??
What grit?
Ed
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: What ya think??
They should work well.
Back in the 70's I worked at an auto parts distributor and we sold them.
We got in some big ones on special order, I think they were around 24" in diameter, but they would make them any size, for cleaning things like pipelines.
Back in the 70's I worked at an auto parts distributor and we sold them.
We got in some big ones on special order, I think they were around 24" in diameter, but they would make them any size, for cleaning things like pipelines.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: What ya think??
@ rieble > What grit?
I was thinking a finer one 180- 220, they just have surface rust if any, just was thinking of just cleaning them up, then Penitrol and wax the insides.
I was thinking a finer one 180- 220, they just have surface rust if any, just was thinking of just cleaning them up, then Penitrol and wax the insides.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: What ya think??
You will need a 4 foot shaft extender(they are only 8" long).ERLover wrote:@ rieble > What grit?
I was thinking a finer one 180- 220, they just have surface rust if any, just was thinking of just cleaning them up, then Penitrol and wax the insides.
I would just coat with penetrol and skip all the other stuff.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: What ya think??
I was going to ask why? But, again, you beat me to it.JPG wrote:You will need a 4 foot shaft extender(they are only 8" long).ERLover wrote:@ rieble > What grit?
I was thinking a finer one 180- 220, they just have surface rust if any, just was thinking of just cleaning them up, then Penitrol and wax the insides.
I would just coat with penetrol and skip all the other stuff.
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
Re: What ya think??
Are we reading the same post?JPG wrote:You will need a 4 foot shaft extender(they are only 8" long).ERLover wrote:@ rieble > What grit?
I was thinking a finer one 180- 220, they just have surface rust if any, just was thinking of just cleaning them up, then Penitrol and wax the insides.
I would just coat with penetrol and skip all the other stuff.
"Tubes are are cleaned up, but thinking of using this to clean up the inside diameters on the Head stock tail stock, ect."
No need for extensions for this.
Now back to the post.
I'm wondering about how well these work for cleaning rust, light corrosion so I vote for getting one and trying it out and letting us know.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
-
everettdavis
- Platinum Member
- Posts: 2163
- Joined: Thu Jul 17, 2014 11:49 am
- Location: Lubbock, TX
Re: What ya think??
My thoughts were to just soak tubes in Evapo-Rust in 2" PVC pipes which would clean the internal rust equally well, then spray a liberal amount of the Evapo-Rust Rust-Block in the center of the tubes, clean any residue on the outside and Johnsons Paste Wax them as recommended.
Evapo-Rust Rust-Block works for a year on its own, and one could do a touch up spray in the ends of the tubes every few years. Many of them are 50 or 60 years old now and internal rust hasn't eaten much metal I suspect.
I'm sure there are a few exceptions but not for the majority of them.
Has anyone used the Rust-Block component in this application or have any data on it?
Everett
Evapo-Rust Rust-Block works for a year on its own, and one could do a touch up spray in the ends of the tubes every few years. Many of them are 50 or 60 years old now and internal rust hasn't eaten much metal I suspect.
I'm sure there are a few exceptions but not for the majority of them.
Has anyone used the Rust-Block component in this application or have any data on it?
Everett
Re: What ya think??
" Dingle ball" hones?
Yes they'll work!
But, for a Model 10 headstock. (or any model 10 stuff)
aren't they overkill?
Just use some fine wet or dry sandpaper on the bores.
and "you'll be fine."
steve
Yes they'll work!
But, for a Model 10 headstock. (or any model 10 stuff)
aren't they overkill?
Just use some fine wet or dry sandpaper on the bores.
and "you'll be fine."
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: What ya think??
Guess I was the first to misread(like not seeing the words,but seeing others that are not there) the post.
Yeah, a neat idea. Worth the $ and time? Maybe.
I can see that on CI model 10 parts(not stated in the post, but relevant I believe). On the aluminum Mark castings - not so much.
Yeah, a neat idea. Worth the $ and time? Maybe.
I can see that on CI model 10 parts(not stated in the post, but relevant I believe). On the aluminum Mark castings - not so much.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange