New Mexico and T or C

Moderator: admin

Post Reply
User avatar
db5
Platinum Member
Posts: 1192
Joined: Mon Jun 06, 2011 6:20 pm
Location: Oklahoma City

New Mexico and T or C

Post by db5 »

I see posts from our member in T or C New Mexico and am reminded of two amusing events in 1965-66 when I moved from New Mexico to New York.

The first was when I was stopped outside Chicago, IL by the highway patrol (not speeding because I was pulling a U-Haul trailer). I thought it was a hassle and when he asked for license, etc. I said, "No comprende ingles. Como se dice en espanol por forvor." He went to the back of my car and looked at the plate NEW MEXICO and then waved me on. Almost everyone north of Kansas and east of the Mississippi thought New Mexico was not in the US.

In early 1966 I was riding with a friend I had met who as also from New Mexico. She was from Truth or Consequences and her license stated T or C. The Suffolk County sheriff deputy who stopped her asked her what T or C was. She told him "Truth or Consequences". Probably because that was still a popular TV show he thought she was being a smart ass and asked again and when she told him he put her under arrest. I tried to intervene to explain but he just shut me down. Since he had called for backup and an impound truck to tow her car when they arrived I had a chance to explain to another deputy that T or C was indeed Truth or Consequences and why the name was changed form Hot Springs. I imagine one poor red-faced deputy was razed for months for his lack of knowledge. I doubt any of the others knew any differently.

Fortunately, older Americans now recognize that New Mexico is part of the continental United States. Not so sure about the younger ones.
User avatar
rjent
Platinum Member
Posts: 2121
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Re: New Mexico and T or C

Post by rjent »

There is an article in the back of New Mexico magazine every month called "one of our states is missing". It's subject is that very thing.... every month ... :D
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Re: New Mexico and T or C

Post by Ed in Tampa »

Wow never knew New Mexico was part of the US. Do you need a passport to visit? Any special shot, like yellow fever vaccinations? Wow who knew!

In passing I wonder which side of Trump's wall will they be?
User avatar
rjent
Platinum Member
Posts: 2121
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Re: New Mexico and T or C

Post by rjent »

Personally I can't wait for "the Donald"'s (or as I call him, Mr. Trump) wall. It is getting dangerous to even travel on some highways in Southern NM and Arizona because of Mexican Cartel guerrillas. Of course the media doesn't say anything about that.

And, yes Ed, we will be North of the wall .... :D
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Re: New Mexico and T or C

Post by reible »

I think the fault lies in the name. New Mexico, it sounds like Mexico just a newer part. Now they could have gone with East Arizona or South Colorado or even came up with there own name like Canada or something cool like that....

I mean who names there towns things like Albuquerque? Time to get a PR firm and get with the program, perhaps a new slogan like "The new New Mexico USA" Keep the USA in the message will help.

You know I wouldn't mind doing my part, maybe a grant of oh say 2 million for a years study on the problem and then say another 10 million for planning a bunch of billboards in every state proclaiming "Yes it says New Mexico but we are in the USA". On maps we could get the USA added just below the state name.... maybe get sports team called the "Roswell New Mexico USA Team" Perhaps a Winter Olympics for Santa Fe USA. Getting the word out for only 12 million sounds like a good start.

Ed from IL (who we all know is a state)
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
User avatar
rjent
Platinum Member
Posts: 2121
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Re: New Mexico and T or C

Post by rjent »

reible wrote:I think the fault lies in the name. New Mexico, it sounds like Mexico just a newer part. Now they could have gone with East Arizona or South Colorado or even came up with there own name like Canada or something cool like that....

I mean who names there towns things like Albuquerque? Time to get a PR firm and get with the program, perhaps a new slogan like "The new New Mexico USA" Keep the USA in the message will help.

You know I wouldn't mind doing my part, maybe a grant of oh say 2 million for a years study on the problem and then say another 10 million for planning a bunch of billboards in every state proclaiming "Yes it says New Mexico but we are in the USA". On maps we could get the USA added just below the state name.... maybe get sports team called the "Roswell New Mexico USA Team" Perhaps a Winter Olympics for Santa Fe USA. Getting the word out for only 12 million sounds like a good start.

Ed from IL (who we all know is a state)
If you need any help with "dispersing" that grant, let me know :D
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
ERLover
Platinum Member
Posts: 3914
Joined: Mon Aug 31, 2015 10:19 pm
Location: Greenie and Goldie Country not to metion the WI Badgers!

Re: New Mexico and T or C

Post by ERLover »

rjent wrote:Personally I can't wait for "the Donald"'s (or as I call him, Mr. Trump) wall. It is getting dangerous to even travel on some highways in Southern NM and Arizona because of Mexican Cartel guerrillas. Of course the media doesn't say anything about that.

And, yes Ed, we will be North of the wall .... :D
Not to mention all the children still crossing into the US from South America.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts :D :D :D :D :D :D
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them. :)
User avatar
rjent
Platinum Member
Posts: 2121
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Re: New Mexico and T or C

Post by rjent »

ERLover wrote:
rjent wrote:Personally I can't wait for "the Donald"'s (or as I call him, Mr. Trump) wall. It is getting dangerous to even travel on some highways in Southern NM and Arizona because of Mexican Cartel guerrillas. Of course the media doesn't say anything about that.

And, yes Ed, we will be North of the wall .... :D
Not to mention all the children still crossing into the US from South America.
Children are the least of it: (but are a very real problem)
Five of the men were from Pakistan and one was from Afghanistan, the FBI confirmed to the station. "The group were with some Mexican nationals and were being smuggled into the country," FBI spokesman Kurt Remis said.http://www.ibtimes.com/isis-entering-us ... es-2192635
A brigade of veterans, former law enforcement, and private security personnel is patrolling the U.S. southern border with a renewed mission to protect the homeland from potential ISIS terrorists.

The Arizona Border Recon was formed in 2011 to help stop the flow of undocumented migrants and illegal goods crossing the border. It is made up of heavily armed men that patrol a 600 square-mile area on the Arizona-Mexico border.

Given the increasing threat from ISIS terrorists, the group is now worried that a potential terrorist could easily infiltrate the border. Tim 'Nailer' Foley, the 56-year-old founder of the group, says his hidden cameras have caught 'Middle Eastern guys with beards.'

"A couple weeks ago, 10 miles to the west of us, they got five Pakistanis and an Afghani trying to get through the border and they got caught," said Foley, a veteran and head of field operations for the group, referencing a report confirmed by the FBI. "On trail cameras, we've seen Somali and Sudanese – everybody and their brother is coming though that border." http://latino.foxnews.com/latino/news/2 ... errorists/
We need to close the border ... IMHO
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
Annette
Bronze Member
Posts: 1
Joined: Mon Jun 20, 2016 2:01 pm

Re: New Mexico and T or C

Post by Annette »

I am looking for a Shopsmith instructor in New Mexico. I reside in Los Alamos and am willing to travel for sessions. Do you know of anyone who offers such a thing? Thanks for your help.
User avatar
rjent
Platinum Member
Posts: 2121
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Re: New Mexico and T or C

Post by rjent »

I sent you a PM.....
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
Post Reply