Today in the shop (shopsmith Stabilax)
Moderator: admin
Today in the shop (shopsmith Stabilax)
This was something from back in the days when there were Shopsmith stores. The part number was 516336 and it cost $25 even. It has never been opened much less used. The date on the back is 1990.
I was digging in a box out in the shop and there it was. I kind of remember it but it never got into use so I'm not sure what is up with that.
Does anyone have a history with one of these? Something from the golden age of shopsmith?
Sure got my $25 worth of use out of it... not.
Ed
I was digging in a box out in the shop and there it was. I kind of remember it but it never got into use so I'm not sure what is up with that.
Does anyone have a history with one of these? Something from the golden age of shopsmith?
Sure got my $25 worth of use out of it... not.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Today in the shop (shopsmith Stabilax)
It ain't over 'til that fat lady sings, so you may yet get your $25 out of it!reible wrote: Sure got my $25 worth of use out of it... not.
Ed
As to your question, I've got nothing.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Today in the shop (shopsmith Stabilax)
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Today in the shop (shopsmith Stabilax)
Thank you for the find!
Guessing here but it must have been an item that shopsmith the rights to, it has their part number. The magazine is also 1990 so that adds up to shopsmith sell this at almost the same time. It looks like mine is about an inch in diameter. That is smaller then the ones mentioned and mine has a set screw with allen wrench.
Ed
Guessing here but it must have been an item that shopsmith the rights to, it has their part number. The magazine is also 1990 so that adds up to shopsmith sell this at almost the same time. It looks like mine is about an inch in diameter. That is smaller then the ones mentioned and mine has a set screw with allen wrench.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Today in the shop (shopsmith Stabilax)
A SS modified item with license from the OEM?reible wrote:Thank you for the find!
Guessing here but it must have been an item that shopsmith the rights to, it has their part number. The magazine is also 1990 so that adds up to shopsmith sell this at almost the same time. It looks like mine is about an inch in diameter. That is smaller then the ones mentioned and mine has a set screw with allen wrench.
Ed
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: Today in the shop (shopsmith Stabilax)
Interesting device and article.
The rounded heel side of the skew at that larger radius, must be neat!
When I took the Shopsmith course on turning, we were instructed to grind a curved radius about 3 inches long, on the heel side of the skew. Even the smaller radius of this grind helped my skew handling a bit.
The rounded heel side of the skew at that larger radius, must be neat!
When I took the Shopsmith course on turning, we were instructed to grind a curved radius about 3 inches long, on the heel side of the skew. Even the smaller radius of this grind helped my skew handling a bit.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Chuck in Lancaster, CA
Re: Today in the shop (shopsmith Stabilax)
Time to give it a whirl, Ed!
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Today in the shop (shopsmith Stabilax)
http://www.google.com/patents/US4998572
Status:
Dec 8, 1992 CC Certificate of correction
Aug 30, 1994 FPAY Fee payment
Year of fee payment: 4
Oct 6, 1998 REMI Maintenance fee reminder mailed
Mar 14, 1999 LAPS Lapse for failure to pay maintenance fees
May 25, 1999 FP Expired due to failure to pay maintenance fee Effective date: 19990312
Not sure what that means but it looks like he didn't sell it to shopsmith.
Ed
Status:
Dec 8, 1992 CC Certificate of correction
Aug 30, 1994 FPAY Fee payment
Year of fee payment: 4
Oct 6, 1998 REMI Maintenance fee reminder mailed
Mar 14, 1999 LAPS Lapse for failure to pay maintenance fees
May 25, 1999 FP Expired due to failure to pay maintenance fee Effective date: 19990312
Not sure what that means but it looks like he didn't sell it to shopsmith.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Today in the shop (shopsmith Stabilax)
Looks like you can still buy one here for $19.80.
http://woodworker.com/3-12-stabilax-mssu-823-332.asp
Sorry Ed, looks like your investment has declined in value.
http://woodworker.com/3-12-stabilax-mssu-823-332.asp
Sorry Ed, looks like your investment has declined in value.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Today in the shop (shopsmith Stabilax)
That's the sale price, so when it goes off sale it is $26.59......... and who knows I might not have actually paid $25 I might have gotten it on sale????.
Interesting that someone still sells these.
Ed
Interesting that someone still sells these.
Ed
algale wrote:Looks like you can still buy one here for $19.80.
http://woodworker.com/3-12-stabilax-mssu-823-332.asp
Sorry Ed, looks like your investment has declined in value.
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]