Then I used some of the same hardware I'd used per recommendation of Bill Mayo (long socket-head cap screw and locking nut) on Mk5-porkchop/speedchanger refurbs. It all came out great!
- Rake_Refurb.jpg (94.25 KiB) Viewed 1605 times
Mayo-Porkchop-inspired h/w repairs Rake
Moderator: admin
Mayo-Porkchop-inspired h/w repairs Rake
The old yard-rake started flopping around Saturday. I'd had enough of the hollow-tube original red handle, so I retrofitted another wood handle to it. Of course I put the Mk5 Drill Press to work, and tilted the table+fence 45 degrees, so as to drill through the utmost center of the new pole.
Then I used some of the same hardware I'd used per recommendation of Bill Mayo (long socket-head cap screw and locking nut) on Mk5-porkchop/speedchanger refurbs. It all came out great!
Chris
Then I used some of the same hardware I'd used per recommendation of Bill Mayo (long socket-head cap screw and locking nut) on Mk5-porkchop/speedchanger refurbs. It all came out great!
Chris
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Mayo-Porkchop-inspired h/w repairs Rake
PLASTIC Handles 
GRRRR!!!
GRRRR!!!╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Mayo-Porkchop-inspired h/w repairs Rake
Another repair job....
A stout old Japanese kanna plane which had a split. The bolt and nut (Frankenstein's Neck repair!?) have put this effective plane back in business!
Chris
A stout old Japanese kanna plane which had a split. The bolt and nut (Frankenstein's Neck repair!?) have put this effective plane back in business!
- Kanna_Bolted.jpg (114.59 KiB) Viewed 1472 times
Re: Mayo-Porkchop-inspired h/w repairs Rake
You could have made a wood plug or dowel to fit in the old red handle and drilled a new hole.