I went to the local hardwood supplier and they had a bin of Walnut end cuts at a really cheap price. They are in the rough at 1" thick and about a square.foot each. It's all highly figured so I thought it would be worth a try. Looks to be very good small box or bowl material.
Paul
Interesting find
Moderator: admin
-
masonsailor2
- Platinum Member
- Posts: 1564
- Joined: Wed Feb 05, 2014 11:57 am
- Location: Las Vegas NV
Interesting find
- Attachments
-
- image.jpeg (187.77 KiB) Viewed 7636 times
Re: Interesting find
Nice find! Hope you enjoy!
Chris
Chris
-
masonsailor2
- Platinum Member
- Posts: 1564
- Joined: Wed Feb 05, 2014 11:57 am
- Location: Las Vegas NV
Re: Interesting find
Well I made it to Amarillo. Interesting town. The home of Bell Helicopters. Before I left I had some shop time and made progress on a couple of projects. I had started a bowl from that figured maple and made good progress on it. I also put the second coat of varnish on the teak cockpit table. With some of the precious teak scraps I also turned a cone for the helm on the boat which is something I have been trying to get to for some time.
Paul
Paul
- Attachments
-
- image.jpeg (179.61 KiB) Viewed 7386 times
-
- image.jpeg (189.26 KiB) Viewed 7386 times
-
- image.jpeg (251.83 KiB) Viewed 7386 times
-
- image.jpeg (200.53 KiB) Viewed 7386 times
-
masonsailor2
- Platinum Member
- Posts: 1564
- Joined: Wed Feb 05, 2014 11:57 am
- Location: Las Vegas NV
Re: Interesting find
I managed to get a day in the shop and get the bowl completed and first coat on. I'm very impressed with the wood. My only concern is how dark will it get with age and how much of the grain detail will be lost. Very difficult wood to turn due to the nature of the burl/grain but I love the end result. Very little sanding required. It shaves to almost a polished surface with a scew chisel.
Paul
Paul
- Attachments
-
- image.jpeg (202.84 KiB) Viewed 7289 times
-
- image.jpeg (159.32 KiB) Viewed 7289 times
-
- image.jpeg (221.63 KiB) Viewed 7289 times
-
- image.jpeg (124.42 KiB) Viewed 7289 times
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Interesting find
Very Nice!!!
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: Interesting find
That's a gorgeous bowl.
Re: Interesting find
Beautiful bowl! Nice work.
PowerPro Mark 7, 11" Bandsaw, 4" Jointer, 12" Professional Planer, DC3300 Dust Collector, DW745, DW718 w/ DW723 and a DW788 w/ DW7880.
Success is not final, failure is not fatal: it is the courage to continue that counts. -Winston Churchill
Success is not final, failure is not fatal: it is the courage to continue that counts. -Winston Churchill
-
BuckeyeDennis
- Platinum Member
- Posts: 3815
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Interesting find
Fabulous work! If I may ask, how do you present the skew to the work for the finish shaving?
-
masonsailor2
- Platinum Member
- Posts: 1564
- Joined: Wed Feb 05, 2014 11:57 am
- Location: Las Vegas NV
Re: Interesting find
I start at a very high angle at a point where the cutting edge is not in contact with the wood and then bring the chisel up to the level that the cutting edge just begins to shave the wood. You're looking to produce a very fine shaving of wood.
Paul
Paul
-
swampgator
- Platinum Member
- Posts: 1256
- Joined: Fri Nov 27, 2009 9:32 pm
- Location: Pensacola, FL
Re: Sorry, sidebar
Beautiful bowl and wonderful craftsmanship. I look forward to the day that I can do that. But, totally off topic,
I saw an very unusual tool rest. Can you please explain if you made this, if the post on the back side of the Shopsmith is plain or is it notched like the front post? Thank you.
Steve, the old swampgator
I saw an very unusual tool rest. Can you please explain if you made this, if the post on the back side of the Shopsmith is plain or is it notched like the front post? Thank you.
Steve, the old swampgator