Not really a tool review as much as an observation. I needed to get a few trinkets from Her Highness the MS for the grayling, drive hub, another handle and the thing it screws into for the quill extender. I notice the black handle one is about 3/4-1" longer then the red ones. Like it better and still clears the sanding disc.
I still prefer the balled ends like the ER has though, I picked up a few of them from HogWinslow but they are shorter then Skips but not as pricey.
Stuff from the MS.
Moderator: admin
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Stuff from the MS.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: Stuff from the MS.
I agree with the balled ends. That is why i am going to turn a piece,of very hard wood into a ball, drill and tap it and voila! Now where can i find a lathe! 
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Stuff from the MS.
An ER but for thread cutting you need a Machinist Lathe with a power drive to the cutter. BUT I think you were pulling my legChrisNeilan wrote:I agree with the balled ends. That is why i am going to turn a piece,of very hard wood into a ball, drill and tap it and voila! Now where can i find a lathe!
It felt good though KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Stuff from the MS.
I think he was 'looking' for a lathe to turn the ball. Drilling and tapping does not require a lathe.
FWIW, I refer the Mark 5 handles.
FWIW, I refer the Mark 5 handles.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Stuff from the MS.
JPG I am glad you could gift us today with your extreme knowledge 
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Stuff from the MS.
JPG I know that and so does Chris, but he is a turner, I would Epoxy the ball on the shaft, and just do a die to cut the threads, but I know you new better or another way?
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Stuff from the MS.
Jesus JPG, is your EGO so BIG you have to be right ALL the TIME I mean on SS stuff you, Dusty, JB are right on and a few others, Rieble ect, I dont want to leave anyone out, but Jesus,JPG sometimes give it a rest
My rant for tonight, and counting the hours and minutes till out of here without mom tomorrow afternoon for 10+ days!!!!!!!!!!!!!!!!
I mean on SS stuff you, Dusty, JB are right on and a few others, Rieble ect, I dont want to leave anyone out, but Jesus,JPG sometimes give it a rest My rant for tonight, and counting the hours and minutes till out of here without mom tomorrow afternoon for 10+ days!!!!!!!!!!!!!!!!
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Stuff from the MS.
JPG did you EVER look at his turned stuff??? Exmas ornaments, bird houses ect, He was being facious.ChrisNeilan wrote:I agree with the balled ends. That is why i am going to turn a piece,of very hard wood into a ball, drill and tap it and voila! Now where can i find a lathe!
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
-
ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: Stuff from the MS.
Oh dear, let's play nice! It was all in good fun.
Speaking of turning, I set up my 10er in the garage so i can wheel it out into the driveway. Beautiful weather last weekend so i decided to turn some Freedom Pens! This was actually the first time using the 10 as a lathe and it performed well. A little different from my big Powermatic, but a lot of fun!
It was all in good fun. Speaking of turning, I set up my 10er in the garage so i can wheel it out into the driveway. Beautiful weather last weekend so i decided to turn some Freedom Pens! This was actually the first time using the 10 as a lathe and it performed well. A little different from my big Powermatic, but a lot of fun!
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Stuff from the MS.
Michael! Look back here(http://www.shopsmith.com/ss_forum/viewt ... 73#p215073)
THAT is what prompted my 'comment'.
Think about it!
THAT is what prompted my 'comment'.
Think about it!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange