Storming today with lots of lightning, so can't work on the project so I'll show off progress...
Got the top and bottoms and cut the box apart. Next I am organizing and making tool holders for each tool. It's a bit of a brain teaser as some are smaller than the depth and others just a bit bigger, so I need to organize in 3 dimensions so that it closes still. Not to mention each tool holder needs to hold it in place during transport and can still take it out fairly easy.
Oh ya, no metal either. At least I'll be able to turn a nice handle. Probably need to turn a pin for the big out of hard maple as well. That should be fun, lol.
Initial layout
IMAG0197-1024x576.jpg (151.71 KiB) Viewed 9987 times
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
The only essential I think I should add to the above set would be a drill, but I honestly have no desire to hand drill any projects. I'll bring my cordless drill on the side. Lol.
Of you ever I'm missing something you believe is an essential, let me know. I'm already adding a pencil because the knife isn't always the best option.
A combo square is probably the single most-used tool in my shop. But then, I don't recall seeing one in the H.O. Studley tool chest. (Am pretty sure he didn't have digital calipers either! )
A combo square is probably the single most-used tool in my shop. But then, I don't recall seeing one in the H.O. Studley tool chest. (Am pretty sure he didn't have digital calipers either! )
Just a small machinists square is all I could fit.
dusty wrote:When working with hand tools, do you really need a caliper? It seems that a 6" rule marked in 64th would be adequate.
Lol, the caliper is my marking gage. Sharp edges of the tip get me perfect scoring lines for thickness.
It must work or you wouldn't use it that way. I use an exacto knife for marking whenever I need accuracy. Otherwise, I use a mechanical pencil with hard lead. Similar to this. http://www.globalindustrial.com/p/offic ... oCsqTw_wcB
SideBar: How do you post this link so that it shows when you click on something in the text (like the word this in this post).
"Making Sawdust Safely" Dusty
Sent from my Dell XPS using Firefox.
[ url=http://www.shopsmith.com]Mothership[/url ]
Just make sure to make to remove those spaces near "url", they are needed to show the code or else the link would show up without the code.
dusty wrote:SideBar: How do you post this link so that it shows when you click on something in the text (like the word this in this post).
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
)