I have two 30" Air King oscillating fans that work great. When it gets in the high 90's it is a little warm but not too bad. 70's and 80's I just open the windows and it is perfect. There is almost always a breeze.
I almost had a Heart Attack, I thought JPG was posting pics of his shop He has been a bit wet in KT based on the Radar.
Ya John you are in a dry heat
Yesterday and a few B4 that, 90* and Dew points in the 60+ here, today 66*, in long pants and a thin jacket in the garage shop. No shorts, and short sleeve T shirt today.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
moose wrote:Well Ed, I appreciate your post and idea, that is, before BBB got a fan into it.
Well Moose Chill the fan thing was in reference to the HEAT and Humidity HE MENTIONED IN HIS GARAGE SHOP that I had also in SE WI until today
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
moose wrote:Well Ed, I appreciate your post and idea, that is, before BBB got a fan into it.
You got a problem? PM me
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
I have two 30" Air King oscillating fans that work great. When it gets in the high 90's it is a little warm but not too bad. 70's and 80's I just open the windows and it is perfect. There is almost always a breeze.
John,first pic, was that good for you???
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
I think it funny that people would think I need a fan...........
Anyway here is a picture of the angle aluminum angle I used to mount the shelf. It would have been nicer to have a slightly larger angle but the 1" I had worked.
IMG_2513sc.jpg (100.72 KiB) Viewed 7460 times
What is nice about the shelf is that it slides in out of the way when not in use. With it out I can not get to the back of the garage so it will not become a place to just lay things.
Had some medical testing today so I did not get back to do a little sanding and adding a pull. Hope to find the time tomorrow. It works as it is anyway so functionally it is done.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
reible wrote:I think it funny that people would think I need a fan...........
Anyway here is a picture of the angle aluminum angle I used to mount the shelf. It would have been nicer to have a slightly larger angle but the 1" I had worked.
IMG_2513sc.jpg
What is nice about the shelf is that it slides in out of the way when not in use. With it out I can not get to the back of the garage so it will not become a place to just lay things.
Had some medical testing today so I did not get back to do a little sanding and adding a pull. Hope to find the time tomorrow. It works as it is anyway so functionally it is done.
Ed
I have no jig, even tho they sell them, putting in cabinet hardware is precise and a PITA.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Well we have that in common. I have no jig either. Maybe someday if I have a bunch to do for some project. For the one off's I just do it the old way and make do.
Ed
ERLover wrote:
reible wrote:I think it funny that people would think I need a fan...........
Anyway here is a picture of the angle aluminum angle I used to mount the shelf. It would have been nicer to have a slightly larger angle but the 1" I had worked.
IMG_2513sc.jpg
What is nice about the shelf is that it slides in out of the way when not in use. With it out I can not get to the back of the garage so it will not become a place to just lay things.
Had some medical testing today so I did not get back to do a little sanding and adding a pull. Hope to find the time tomorrow. It works as it is anyway so functionally it is done.
Ed
I have no jig, even tho they sell them, putting in cabinet hardware is precise and a PITA.
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Yes they do require planning and detailed execution.
PITA? Only if the just mentioned stuff is not done or ignored.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
JPG wrote:Yes they do require planning and detailed execution.
PITA? Only if the just mentioned stuff is not done or ignored.
JPG, some days I just dont know/understand your jiberish???
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
He has been a bit wet in KT based on the Radar.
