Heads Up - Bargain 'available'

JPG · Post by **JPG** » Wed Jul 27, 2016 9:56 pm

redleg wrote:Not real cheap but a bargain considering all the SPT and accessories. The OPR is a fairly rare sighting here. Setting on the OPR is part of a lathe duplicator might be a teaser or a random extra part.

http://charlotte.craigslist.org/tls/5696439606.html

it includes a Ring master on the ground, AND a lathe duplicator manual in the tray.

thunderbirdbat · Post by **thunderbirdbat** » Wed Jul 27, 2016 10:34 pm

https://iowacity.craigslist.org/tls/5649884519.html

Not sure if a bargain but definitely all you would need to start with and then some.

Beave2012 · Post by **Beave2012** » Thu Jul 28, 2016 12:58 am

thunderbirdbat wrote:https://iowacity.craigslist.org/tls/5649884519.html

Not sure if a bargain but definitely all you would need to start with and then some.

I wouldn't call this a bargain. Three 500s and a 510 with a fair amount of SPT. So its off to a decent start, but only 2 disc sanders in that whole setup and 3 boxes of "replacement parts". Who knows, maybe some treasures in there, BUT for $2400 I would rather hit up craigslist for a $600-$800 worth and then pickup a power pro upgrade.

This current package at $1000 would be an alright deal, maybe.

BuckeyeDennis · Post by **BuckeyeDennis** » Thu Jul 28, 2016 11:31 pm

I have no space for it, but this is a nice deal even if just for spare parts. Someone please buy it, so that I can't!

: image.jpeg (45.04 KiB) Viewed 7536 times

http://columbus.craigslist.org/tls/5703162614.html

ERLover · Post by **ERLover** » Fri Jul 29, 2016 12:17 am

BuckeyeDennis wrote:I have no space for it, but this is a nice deal even if just for spare parts. Someone please buy it, so that I can't!

image.jpeg
http://columbus.craigslist.org/tls/5703162614.html

BD, man up!!!

Thats like an Alcoholic asking his sober friend to dump the booze down the drain so he cant drink it

Buy it, it is just $50, maybe $40 with a cry. The kids dont need new shoes till school starts in a month.
Save one, didnt you watch The DNC for the last 4 nights? You have a Moral Obligation to save it from scrap, or buy it and resell it to a responsible owner

ERLover · Post by **ERLover** » Fri Jul 29, 2016 10:59 am

An other one to rescue, it is by moms, if only it had a Speed Changer.
http://milwaukee.craigslist.org/tls/5706401778.html

JPG · Post by **JPG** » Fri Jul 29, 2016 3:28 pm

A 10E with an 'upgraded' rip fence(fairly rare) A mortiser and chisel/bit(?). Wonder if there is a hold down somewhere?

Oh and very excellent condition it appears.

Beave2012 · Post by **Beave2012** » Sat Jul 30, 2016 9:00 am

http://minneapolis.craigslist.org/hnp/t ... 87719.html

$200 ain't bad.

JPG · Post by **JPG** » Sat Jul 30, 2016 10:21 am

Beave2012 wrote:http://minneapolis.craigslist.org/hnp/t ... 87719.html

$200 ain't bad.

Wonder why the tie rod is in the tool box?

BuckeyeDennis · Post by **BuckeyeDennis** » Sat Jul 30, 2016 11:42 pm

JPG, if you need a speed changer, this one is only an hour from Lexington. And you could probably solve reible's motor shortage, to boot!

As it happens, I'll be in Cinci tomorrow, with u-haul trailer, moving my coed daughter to new digs. But no time for a side trip.

: image.jpeg (72.15 KiB) Viewed 4281 times

http://cincinnati.craigslist.org/tls/5690272562.html

Shopsmith Forums

Heads Up - Bargain 'available'

Re: Heads Up - Bargain 'available'

Re: Heads Up - Bargain 'available'

Re: Heads Up - Bargain 'available'

Clean working 10ER for $50

Re: Clean working 10ER for $50

Re: Heads Up - Bargain 'available'

Re: Heads Up - Bargain 'available'

Re: Heads Up - Bargain 'available'

Re: Heads Up - Bargain 'available'

Most of a 10E/R, with speed changer, for $75